TID100AUS Site Information Form (site log) International GNSS Service See Instructions at: ftp://igs.org/pub/station/general/sitelog_instr.txt 0. Form Prepared by (full name) : ted.zhou@ga.gov.au Date Prepared : 2018-11-21 Report Type : UPDATE If Update: Previous Site Log : tid1_20170504.log Modified/Added Sections : 3.10 1. Site Identification of the GNSS Monument Site Name : Tidbinbilla (Canberra) Four Character ID : TID1 Monument Inscription : TIDBINBILLA SPC40 IERS DOMES Number : 50103M108 CDP Number : NONE Monument Description : PILLAR Height of the Monument : 5.0 m Monument Foundation : CONCRETE pillar Foundation Depth : Marker Description : Stainless Steel Plate Date Installed : 1992-05-01T00:00Z Geologic Characteristic : Bedrock Type : Bedrock Condition : Fracture Spacing : Fault zones nearby : Distance/activity : Additional Information : (multiple lines) AU017 is the unique national : identifier for the drill hole in the centre of a : small triangle in the top centre of the pillar : plate. The GPS antenna is set over this mark : The ROGUE Antenna was first mounted on a : 25-meter, un-guided, microwave tower. On : 92/02/02 the GPS antenna was moved from the : tower to the current location monument #4002-S. : Antenna is shared by site TIDB and TID2 2. Site Location Information City or Town : Canberra State or Province : Australian Capital Territory (ACT) Country : Australia Tectonic Plate : AUSTRALIAN Approximate Position (ITRF) X coordinate (m) : -4460996.069 Y coordinate (m) : 2682557.144 Z coordinate (m) : -3674443.875 Latitude (N is +) : -352357.16 Longitude (E is +) : +1485847.98 Elevation (m,ellips.) : 665.4 Additional Information : Located at the Canberra Deep Space : Communications Complex (CDSCC), Tidbinbilla : Latitude and Longitude derived from Table 6 : "ITRF94 Class B Station Coordinates at Epoch : 1993.0" 3. GNSS Receiver Information 3.1 Receiver Type : ROGUE SNR-12 RM Satellite System : GPS Serial Number : 206 Firmware Version : 3.2 Elevation Cutoff Setting : 0 deg Date Installed : 1996-07-01T00:00Z Date Removed : 1999-08-20T01:00Z Temperature Stabiliz. : none Additional Information : 3.2 Receiver Type : ROGUE SNR-12 RM Satellite System : GPS Serial Number : 206 Firmware Version : 3.2.32.9 Elevation Cutoff Setting : 0 deg Date Installed : 1999-08-20T01:00Z Date Removed : 1999-09-29T23:00Z Temperature Stabiliz. : none Additional Information : 3.3 Receiver Type : AOA ICS-4000Z ACT Satellite System : GPS Serial Number : C116U Firmware Version : 3.3.32.3 Elevation Cutoff Setting : 0 deg Date Installed : 2000-03-29T02:15Z Date Removed : 2005-01-24T00:00Z Temperature Stabiliz. : none Additional Information : 3.4 Receiver Type : AOA ICS-4000Z ACT Satellite System : GPS Serial Number : C117U Firmware Version : 3.3.32.4 Elevation Cutoff Setting : 0 deg Date Installed : 2005-01-24T00:00Z Date Removed : 2005-06-19T23:59Z Temperature Stabiliz. : none Additional Information : 3.5 Receiver Type : ASHTECH UZ-12 Satellite System : GPS Serial Number : 50014 Firmware Version : CN00 Elevation Cutoff Setting : 0 deg Date Installed : 2005-06-20T00:00Z Date Removed : 2009-04-28T23:59Z Temperature Stabiliz. : none Additional Information : 3.6 Receiver Type : TRIMBLE NETR8 Satellite System : GPS+GLO Serial Number : 4843K33421 Firmware Version : 3.80 Elevation Cutoff Setting : 0 deg Date Installed : 2009-04-29T00:00Z Date Removed : 2012-01-18T00:00Z Temperature Stabiliz. : none Additional Information : 3.7 Receiver Type : TRIMBLE NETR8 Satellite System : GPS+GLO Serial Number : 4843K33421 Firmware Version : 4.43 Elevation Cutoff Setting : 0 deg Date Installed : 2012-01-18T00:00Z Date Removed : 2014-11-21T00:00Z Temperature Stabiliz. : none Additional Information : 3.8 Receiver Type : TRIMBLE NETR8 Satellite System : GPS+GLO Serial Number : 4843K33421 Firmware Version : 4.87 Elevation Cutoff Setting : 0 deg Date Installed : 2014-11-24T00:00Z Date Removed : 2017-05-04T00:00Z Temperature Stabiliz. : none Additional Information : 3.9 Receiver Type : SEPT POLARX5 Satellite System : GPS+GLO+GAL+BDS+QZSS Serial Number : 3012244 Firmware Version : 5.1.1 Elevation Cutoff Setting : 0 deg Date Installed : 2017-05-04T00:00Z Date Removed : 2018-11-21T03:30Z Temperature Stabiliz. : none Additional Information : 3.10 Receiver Type : SEPT POLARX5 Satellite System : GPS+GLO+GAL+BDS+QZSS Serial Number : 3012244 Firmware Version : 5.2.0 Elevation Cutoff Setting : 0 deg Date Installed : 2018-11-21T03:32Z Date Removed : CCYY-MM-DDThh:mmZ Temperature Stabiliz. : none Additional Information : Firmware upgrade only 3.x Receiver Type : (A20, from rcvr_ant.tab; see instructions) Satellite System : (GPS+GLO+GAL+BDS+QZSS+SBAS) Serial Number : (A20, but note the first A5 is used in SINEX) Firmware Version : (A11) Elevation Cutoff Setting : (deg) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : (multiple lines) 4. GNSS Antenna Information 4.1 Antenna Type : AOAD/M_T JPLA Serial Number : 402 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 000.0614 Marker->ARP North Ecc(m) : 000.0000 Marker->ARP East Ecc(m) : 000.0000 Alignment from True N : 0 deg Antenna Radome Type : JPLA Radome Serial Number : Antenna Cable Type : Antenna Cable Length : Date Installed : 1996-06-26T00:00Z Date Removed : 2004-12-08T00:00Z Additional Information : 4.2 Antenna Type : AOAD/M_T JPLA Serial Number : 205 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 000.0614 Marker->ARP North Ecc(m) : 000.0000 Marker->ARP East Ecc(m) : 000.0000 Alignment from True N : 0 deg Antenna Radome Type : JPLA Radome Serial Number : Antenna Cable Type : Antenna Cable Length : Date Installed : 2004-12-13T00:00Z Date Removed : 2016-03-24T00:00Z Additional Information : The antenna splitter was changed to a 12V DC : LCDBS1X4 at 2009-09-21T22:50Z. 4.3 Antenna Type : AOAD/M_T NONE Serial Number : 205 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 000.0614 Marker->ARP North Ecc(m) : 000.0000 Marker->ARP East Ecc(m) : 000.0000 Alignment from True N : 0 deg Antenna Radome Type : NONE Radome Serial Number : Antenna Cable Type : Antenna Cable Length : Date Installed : 2016-03-24T00:00Z Date Removed : 2016-08-04T00:00Z Additional Information : Radome removed. 4.4 Antenna Type : AOAD/M_T NONE Serial Number : 402 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 000.0614 Marker->ARP North Ecc(m) : 000.0000 Marker->ARP East Ecc(m) : 000.0000 Alignment from True N : 0 deg Antenna Radome Type : NONE Radome Serial Number : Antenna Cable Type : Antenna Cable Length : Date Installed : 2016-08-04T00:00Z Date Removed : CCYY-MM-DDThh:mmZ Additional Information : 4.x Antenna Type : (A20, from rcvr_ant.tab; see instructions) Serial Number : (A*, but note the first A5 is used in SINEX) Antenna Reference Point : (BPA/BCR/XXX from "antenna.gra"; see instr.) Marker->ARP Up Ecc. (m) : (F8.4) Marker->ARP North Ecc(m) : (F8.4) Marker->ARP East Ecc(m) : (F8.4) Alignment from True N : (deg; + is clockwise/east) Antenna Radome Type : (A4 from rcvr_ant.tab; see instructions) Radome Serial Number : Antenna Cable Type : (vendor & type number) Antenna Cable Length : (m) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 5. Surveyed Local Ties 5.1 Tied Marker Name : TIDB (AU017) Tied Marker Usage : Tied Marker CDP Number : Tied Marker DOMES Number : 50103M108 Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : 0.0 dy (m) : 0.0 dz (m) : 0.0 Accuracy (mm) : Survey method : Date Measured : 1992-05-12T00:00Z Additional Information : Main GPS mark 5.2 Tied Marker Name : Ant Ref Pt Tied Marker Usage : Tied Marker CDP Number : Tied Marker DOMES Number : 50103S017 Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : -0.064 dy (m) : 0.038 dz (m) : -0.054 Accuracy (mm) : 1.0 mm Survey method : Date Measured : 1992-05-12T00:00Z Additional Information : GPS antenna no longer exists 5.3 Tied Marker Name : DSS45 Tied Marker Usage : Tied Marker CDP Number : 1642 Tied Marker DOMES Number : 50103S010 Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : 60.781 dy (m) : 208.581 dz (m) : 62.538 Accuracy (mm) : 5.0 mm Survey method : Date Measured : 1992-05-12T00:00Z Additional Information : CDP number changed from 1545 to 1642 in this : document following recommendation in mail from : Carey Noll (05-NOV-93, WG) 5.4 Tied Marker Name : NM/C/194 Tied Marker Usage : Tied Marker CDP Number : Tied Marker DOMES Number : 50103M109 Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : -19.324 dy (m) : 162.65 dz (m) : 145.19 Accuracy (mm) : 5.0 mm Survey method : Date Measured : 1992-05-12T00:00Z Additional Information : Domes number according to (Altamimi, 5.x Tied Marker Name : Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc) Tied Marker CDP Number : (A4) Tied Marker DOMES Number : (A9) Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : (m) dy (m) : (m) dz (m) : (m) Accuracy (mm) : (mm) Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc) Date Measured : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 6. Frequency Standard 6.1 Standard Type : EXTERNAL H-MASER Input Frequency : 5 MHz Effective Dates : 1996-07-01/2009-03-28 Notes : 6.2 Standard Type : EXTERNAL H-MASER Input Frequency : 10 MHz Effective Dates : 2009-09-22/CCYY-MM-DD Notes : 6.x Standard Type : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc) Input Frequency : (if external) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 7. Collocation Information 7.1 Instrumentation Type : VLBI Status : PERMANENT Effective Dates : 1992-01-01/CCYY-MM-DD Notes : DSN (P) NBS/GPS Time Transfer Receiver (P) 7.x Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc) Status : (PERMANENT/MOBILE) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8. Meteorological Instrumentation 8.1.x Humidity Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy (% rel h) : (% rel h) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.2.x Pressure Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (hPa) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.3.x Temp. Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (deg C) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.4.x Water Vapor Radiometer : Manufacturer : Serial Number : Distance to Antenna : (m) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.5.x Other Instrumentation : (multiple lines) 9. Local Ongoing Conditions Possibly Affecting Computed Position 9.1.x Radio Interferences : (TV/CELL PHONE ANTENNA/RADAR/etc) Observed Degradations : (SN RATIO/DATA GAPS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.2.x Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.3.x Signal Obstructions : (TREES/BUILDINGS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 10. Local Episodic Effects Possibly Affecting Data Quality 10.x Date : (CCYY-MM-DD/CCYY-MM-DD) Event : (TREE CLEARING/CONSTRUCTION/etc) 11. On-Site, Point of Contact Agency Information Agency : Geoscience Australia Preferred Abbreviation : Mailing Address : GPO Box 378 : Canberra ACT 2601 : AUSTRALIA Primary Contact Contact Name : Ryan Ruddick Telephone (primary) : +61 2 6249 9426 Telephone (secondary) : +61 2 6249 9111 Fax : E-mail : geodesy@ga.gov.au Secondary Contact Contact Name : Nicholas Brown Telephone (primary) : +61 2 6249 9831 Telephone (secondary) : +61 2 6249 9111 Fax : E-mail : geodesy@ga.gov.au Additional Information : 12. Responsible Agency (if different from 11.) Agency : Geoscience Australia Preferred Abbreviation : Mailing Address : GPO Box 378 : Canberra ACT 2601 : AUSTRALIA Primary Contact Contact Name : Ryan Ruddick Telephone (primary) : +61 2 6249 9426 Telephone (secondary) : +61 2 6249 9111 Fax : E-mail : geodesy@ga.gov.au Secondary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Additional Information : 13. More Information Primary Data Center : GA Secondary Data Center : CDDIS URL for More Information : http://www.ga.gov.au Hardcopy on File Site Map : Y Site Diagram : Y Horizon Mask : Y Monument Description : Y Site Pictures : Y Additional Information : Antenna Graphics with Dimensions (insert text graphic from file antenna.gra)