HOB200AUS Site Information Form (site log) International GNSS Service See Instructions at: https://files.igs.org/pub/station/general/sitelog_instr.txt 0. Form Prepared by (full name) : Ross_Udemans Date Prepared : 2022-11-01 Report Type : UPDATE If Update: Previous Site Log : (ssss_ccyymmdd.log) Modified/Added Sections : (n.n,n.n,...) 1. Site Identification of the GNSS Monument Site Name : Hobart AU016 Four Character ID : HOB2 Monument Inscription : National Geodetic Fiducial Network IERS DOMES Number : 50116M004 CDP Number : NONE Monument Description : PILLAR Height of the Monument : 0.5 m Monument Foundation : STEEL RODS SET IN BEDROCK Foundation Depth : Marker Description : STAINLESS STEEL THREADED SPIGOT Date Installed : 1992-08-12T00:00Z Geologic Characteristic : BEDROCK Bedrock Type : JURASSIC DOLERITE Bedrock Condition : FRESH Fracture Spacing : Fault zones nearby : Distance/activity : Additional Information : Monument is a 600mm dia concrete Pillar 0.5 m : high 2. Site Location Information City or Town : Hobart State or Province : Tasmania Country : Australia Tectonic Plate : PACIFIC Approximate Position (ITRF) X coordinate (m) : -3950072.2497 Y coordinate (m) : 2522415.3618 Z coordinate (m) : -4311637.4022 Latitude (N is +) : -424816.94 Longitude (E is +) : +1472619.45 Elevation (m,ellips.) : 41.0 Additional Information : ARGN (Australian Regional GPS Network) 3. GNSS Receiver Information 3.1 Receiver Type : AOA ICS-4000Z Satellite System : GPS Serial Number : C133 Firmware Version : 3.2.33.1 Elevation Cutoff Setting : 0 deg Date Installed : 1995-11-30T00:00Z Date Removed : 1997-05-21T23:59Z Temperature Stabiliz. : none Additional Information : 3.2 Receiver Type : AOA ICS-4000Z Satellite System : GPS Serial Number : C117 Firmware Version : 3.2.33.1 Elevation Cutoff Setting : 0 deg Date Installed : 1997-05-22T00:00Z Date Removed : 1998-10-25T23:59Z Temperature Stabiliz. : none Additional Information : 3.3 Receiver Type : AOA ICS-4000Z Satellite System : GPS Serial Number : C122 Firmware Version : 3.2.33.1 Elevation Cutoff Setting : 0 deg Date Installed : 1998-10-26T00:00Z Date Removed : 1999-08-15T23:59Z Temperature Stabiliz. : none Additional Information : 3.4 Receiver Type : AOA ICS-4000Z Satellite System : GPS Serial Number : C122 Firmware Version : 3.2.32.9 Elevation Cutoff Setting : 0 deg Date Installed : 1999-08-16T00:00Z Date Removed : 1999-11-29T23:59Z Temperature Stabiliz. : none Additional Information : 3.5 Receiver Type : AOA SNR-12 ACT Satellite System : GPS Serial Number : C206U Firmware Version : 3.3.32.3 Elevation Cutoff Setting : 0 deg Date Installed : 1999-11-30T00:00Z Date Removed : 2000-07-26T23:59Z Temperature Stabiliz. : none Additional Information : 3.6 Receiver Type : AOA ICS-4000Z ACT Satellite System : GPS Serial Number : C127U Firmware Version : 3.3.32.3 Elevation Cutoff Setting : 0 deg Date Installed : 2000-07-27T00:00Z Date Removed : 2002-03-28T03:30Z Temperature Stabiliz. : none Additional Information : 3.7 Receiver Type : ASHTECH Z-XII3 Satellite System : GPS Serial Number : 4278 Firmware Version : CD00 Elevation Cutoff Setting : 0 deg Date Installed : 2002-03-28T03:30Z Date Removed : 2002-04-02T00:00Z Temperature Stabiliz. : none Additional Information : 3.8 Receiver Type : AOA ICS-4000Z ACT Satellite System : GPS Serial Number : C127U Firmware Version : 3.3.32.3 Elevation Cutoff Setting : 0 deg Date Installed : 2002-04-02T00:00Z Date Removed : 2005-10-03T23:59Z Temperature Stabiliz. : none Additional Information : 3.9 Receiver Type : ASHTECH UZ-12 Satellite System : GPS Serial Number : 25001 Firmware Version : CQ00 Elevation Cutoff Setting : 0 deg Date Installed : 2005-10-04T00:00Z Date Removed : 2008-12-09T23:59Z Temperature Stabiliz. : none Additional Information : 3.10 Receiver Type : LEICA GRX1200GGPRO Satellite System : GPS+GLO Serial Number : 356495 Firmware Version : 6.02 Elevation Cutoff Setting : 0 deg Date Installed : 2008-12-10T00:00Z Date Removed : 2009-07-06T00:00Z Temperature Stabiliz. : none Additional Information : 3.11 Receiver Type : LEICA GRX1200GGPRO Satellite System : GPS+GLO Serial Number : 356495 Firmware Version : 7.50 Elevation Cutoff Setting : 0 deg Date Installed : 2009-07-06T00:00Z Date Removed : 2010-05-04T00:00Z Temperature Stabiliz. : none Additional Information : The tracking was changed from C2 or P2, to P2 : only at 2009-07-30T00:00Z Tracking was changed : to all in view at 2009-09-09T01:40Z 3.12 Receiver Type : LEICA GRX1200GGPRO Satellite System : GPS+GLO Serial Number : 356495 Firmware Version : 7.50/3.019 Elevation Cutoff Setting : 0 deg Date Installed : 2010-05-04T00:00Z Date Removed : 2010-07-29T00:00Z Temperature Stabiliz. : none Additional Information : ME upgrade due to GLONASS tracking problem. 3.13 Receiver Type : LEICA GRX1200GGPRO Satellite System : GPS+GLO Serial Number : 356495 Firmware Version : 8.00/3.019 Elevation Cutoff Setting : 0 deg Date Installed : 2010-07-29T00:00Z Date Removed : 2010-10-11T00:00Z Temperature Stabiliz. : none Additional Information : Firmware casused RTCM problems 3.14 Receiver Type : LEICA GRX1200GGPRO Satellite System : GPS+GLO Serial Number : 356495 Firmware Version : 8.01/3.019 Elevation Cutoff Setting : 0 deg Date Installed : 2010-10-11T00:00Z Date Removed : 2014-07-17T00:00Z Temperature Stabiliz. : none Additional Information : 3.15 Receiver Type : LEICA GRX1200GGPRO Satellite System : GPS+GLO Serial Number : 356495 Firmware Version : 8.71/3.823 Elevation Cutoff Setting : 0 deg Date Installed : 2014-07-17T00:00Z Date Removed : 2016-11-21T00:00Z Temperature Stabiliz. : none Additional Information : 3.16 Receiver Type : SEPT POLARX5 Satellite System : GPS+GLO+GAL+BDS+QZSS+IRNSS Serial Number : 3012296 Firmware Version : 5.0.2 Elevation Cutoff Setting : 0 deg Date Installed : 2016-11-21T00:00Z Date Removed : 2016-12-21T00:00Z Temperature Stabiliz. : none Additional Information : 3.17 Receiver Type : SEPT POLARX5 Satellite System : GPS+GLO+GAL+BDS+QZSS+IRNSS Serial Number : 3012296 Firmware Version : 5.10 Elevation Cutoff Setting : 0 deg Date Installed : 2016-12-21T00:00Z Date Removed : 2018-09-28T02:45Z Temperature Stabiliz. : none Additional Information : Firmware upgrade only 3.18 Receiver Type : SEPT POLARX5 Satellite System : GPS+GLO+GAL+BDS+IRNSS+QZSS Serial Number : 3012296 Firmware Version : 5.2.0 Elevation Cutoff Setting : 0 deg Date Installed : 2018-09-28T02:45Z Date Removed : 2020-03-02T00:32Z Temperature Stabiliz. : none Additional Information : Firmware upgrade only 3.19 Receiver Type : SEPT POLARX5 Satellite System : GPS+GLO+GAL+BDS+IRNSS+QZSS Serial Number : 3012296 Firmware Version : 5.3.2 Elevation Cutoff Setting : 0 deg Date Installed : 2020-03-02T00:32Z Date Removed : 2021-07-05T16:00Z Temperature Stabiliz. : none Additional Information : Firmware upgrade only 3.20 Receiver Type : SEPT POLARX5 Satellite System : GPS+GLO+GAL+BDS+IRNSS+QZSS Serial Number : 3012296 Firmware Version : 5.4.0 Elevation Cutoff Setting : 0 deg Date Installed : 2021-07-05T16:00Z Date Removed : 2022-11-01T02:43Z Temperature Stabiliz. : none Additional Information : Firmware upgrade only 3.21 Receiver Type : SEPT POLARX5 Satellite System : GPS+GLO+GAL+BDS+IRNSS+QZSS Serial Number : 3012296 Firmware Version : 5.5.0 Elevation Cutoff Setting : 0 deg Date Installed : 2022-11-01T02:43Z Date Removed : CCYY-MM-DDThh:mmZ Temperature Stabiliz. : none Additional Information : Firmware update only 3.x Receiver Type : (A20, from rcvr_ant.tab; see instructions) Satellite System : (GPS+GLO+GAL+BDS+QZSS+SBAS) Serial Number : (A20, but note the first A5 is used in SINEX) Firmware Version : (A11) Elevation Cutoff Setting : (deg) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : (multiple lines) 4. GNSS Antenna Information 4.1 Antenna Type : AOAD/M_T NONE Serial Number : 203 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 000.0000 Marker->ARP North Ecc(m) : 000.0000 Marker->ARP East Ecc(m) : 000.0000 Alignment from True N : 0 deg Antenna Radome Type : NONE Radome Serial Number : Antenna Cable Type : Antenna Cable Length : 100.0 m Date Installed : 1994-07-11T00:00Z Date Removed : 2021-12-17T00:00Z Additional Information : 4.2 Antenna Type : LEIAR25.R4 NONE Serial Number : 726829 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 000.0250 Marker->ARP North Ecc(m) : 000.0000 Marker->ARP East Ecc(m) : 000.0000 Alignment from True N : 0 deg Antenna Radome Type : NONE Radome Serial Number : Antenna Cable Type : Antenna Cable Length : Date Installed : 2021-12-17T00:00Z Date Removed : CCYY-MM-DDThh:mmZ Additional Information : 4.x Antenna Type : (A20, from rcvr_ant.tab; see instructions) Serial Number : (A*, but note the first A5 is used in SINEX) Antenna Reference Point : (BPA/BCR/XXX from "antenna.gra"; see instr.) Marker->ARP Up Ecc. (m) : (F8.4) Marker->ARP North Ecc(m) : (F8.4) Marker->ARP East Ecc(m) : (F8.4) Alignment from True N : (deg; + is clockwise/east) Antenna Radome Type : (A4 from rcvr_ant.tab; see instructions) Radome Serial Number : Antenna Cable Type : (vendor & type number) Antenna Cable Length : (m) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 5. Surveyed Local Ties 5.1 Tied Marker Name : HOBA Tied Marker Usage : LOCAL CONTROL Tied Marker CDP Number : Tied Marker DOMES Number : Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : -112.713 dy (m) : -50.732 dz (m) : 50.2 Accuracy (mm) : 1.0 mm Survey method : TRIANGULATION Date Measured : 1992-08-12T00:00Z Additional Information : 5.2 Tied Marker Name : RM1 Tied Marker Usage : LOCAL CONTROL Tied Marker CDP Number : Tied Marker DOMES Number : Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : -34.909 dy (m) : -3.64 dz (m) : 25.656 Accuracy (mm) : 1.0 mm Survey method : TRIANGULATION Date Measured : 1992-08-12T00:00Z Additional Information : 5.3 Tied Marker Name : RM2 Tied Marker Usage : LOCAL CONTROL Tied Marker CDP Number : Tied Marker DOMES Number : Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : 9.057 dy (m) : -15.836 dz (m) : -14.018 Accuracy (mm) : 1.0 mm Survey method : TRIANGULATION Date Measured : 1992-08-12T00:00Z Additional Information : 5.4 Tied Marker Name : RM3 Tied Marker Usage : LOCAL CONTROL Tied Marker CDP Number : Tied Marker DOMES Number : Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : 11.97 dy (m) : 28.394 dz (m) : 7.93 Accuracy (mm) : 1.0 mm Survey method : TRIANGULATION Date Measured : 1992-08-12T00:00Z Additional Information : 5.5 Tied Marker Name : Hobart VLBI Tied Marker Usage : VLBI Tied Marker CDP Number : 7242 Tied Marker DOMES Number : 50116S002 Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : -165.374 dy (m) : -67.6263 dz (m) : 75.8209 Accuracy (mm) : 2.0 mm Survey method : TRIANGULATION Date Measured : 2002-03-27T00:00Z Additional Information : The components are ITRF97 at 1997.0 VLBI HOB2 + : (dx,dy,dz) 5.6 Tied Marker Name : RM1 Tied Marker Usage : LOCAL CONTROL Tied Marker CDP Number : Tied Marker DOMES Number : Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : -34.909 dy (m) : -3.6377 dz (m) : 25.6572 Accuracy (mm) : 1.0 mm Survey method : TRIANGULATION Date Measured : 2004-08-14T00:00Z Additional Information : 5.7 Tied Marker Name : RM2 Tied Marker Usage : LOCAL CONTROL Tied Marker CDP Number : Tied Marker DOMES Number : Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : 9.0624 dy (m) : -15.8417 dz (m) : -14.0247 Accuracy (mm) : 1.0 mm Survey method : TRIANGULATION Date Measured : 2004-08-14T00:00Z Additional Information : 5.8 Tied Marker Name : RM3 Tied Marker Usage : LOCAL CONTROL Tied Marker CDP Number : Tied Marker DOMES Number : Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : 11.9712 dy (m) : 28.3959 dz (m) : 7.9285 Accuracy (mm) : 1.0 mm Survey method : TRIANGULATION Date Measured : 2004-08-14T00:00Z Additional Information : 5.9 Tied Marker Name : Hobart VLBI Tied Marker Usage : VLBI Tied Marker CDP Number : 7242 Tied Marker DOMES Number : 50116S002 Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : -165.3735 dy (m) : -67.6268 dz (m) : 75.8232 Accuracy (mm) : 2.0 mm Survey method : TRIANGULATION Date Measured : 2004-08-14T00:00Z Additional Information : 5.x Tied Marker Name : Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc) Tied Marker CDP Number : (A4) Tied Marker DOMES Number : (A9) Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : (m) dy (m) : (m) dz (m) : (m) Accuracy (mm) : (mm) Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc) Date Measured : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 6. Frequency Standard 6.1 Standard Type : EXTERNAL H-MASER Input Frequency : 5 MHz Effective Dates : 1993-02-20/1997-05-22 Notes : 6.2 Standard Type : INTERNAL Input Frequency : Effective Dates : 1997-05-22/1998-08-21 Notes : 6.3 Standard Type : EXTERNAL H-MASER Input Frequency : 5 MHz Effective Dates : 1998-08-21/1998-10-02 Notes : 6.4 Standard Type : INTERNAL Input Frequency : Effective Dates : 1998-10-02/1998-10-27 Notes : 6.5 Standard Type : EXTERNAL H-MASER Input Frequency : 5 MHz Effective Dates : 1998-10-27/1999-11-30 Notes : 6.6 Standard Type : INTERNAL Input Frequency : Effective Dates : 1999-11-30/2000-03-13 Notes : 6.7 Standard Type : EXTERNAL H-MASER Input Frequency : 5 MHz Effective Dates : 2000-03-13/2003-02-28 Notes : Suspected Maser problem 6.8 Standard Type : INTERNAL Input Frequency : Effective Dates : 2003-02-28/2003-03-14 Notes : Normal operations with internal switching back : to Maser for testing 6.9 Standard Type : EXTERNAL H-MASER Input Frequency : 5 MHz Effective Dates : 2003-03-14/2004-03-25 Notes : Maser disconnected for servicing. 6.10 Standard Type : INTERNAL Input Frequency : Effective Dates : 2004-03-25/2004-03-30 Notes : Reconnected back to MASER after servicing 6.11 Standard Type : EXTERNAL H-MASER Input Frequency : 5 MHz Effective Dates : 2004-03-31/2013-12-02 Notes : 6.12 Standard Type : EXTERNAL H-MASER Input Frequency : 5 MHz Effective Dates : 2013-12-02/2016-10-31 Notes : Vremya-CH V1005A 6.13 Standard Type : EXTERNAL H-MASER Input Frequency : 5 MHz Effective Dates : 2016-10-31/2016-11-28 Notes : NASA NR11 6.14 Standard Type : EXTERNAL H-MASER Input Frequency : 5 MHz Effective Dates : 2016-11-28/2021-07-05 Notes : Vremya-CH V1005A, S/N 016, refurbished Done : around 0500 UT, possible some disturbances in : the hour prior and up until 0515 UT 6.15 Standard Type : INTERNAL Input Frequency : Effective Dates : 2021-07-05/2021-07-06 Notes : H-MASER distribution failure. 6.16 Standard Type : EXTERNAL H-MASER Input Frequency : 10 MHz Effective Dates : 2021-07-06/CCYY-MM-DD Notes : 6.x Standard Type : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc) Input Frequency : (if external) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 7. Collocation Information 7.1 Instrumentation Type : VLBI Status : PERMANENT Effective Dates : 1992-08-12/CCYY-MM-DD Notes : 7.x Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc) Status : (PERMANENT/MOBILE) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8. Meteorological Instrumentation 8.1.x Humidity Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy (% rel h) : (% rel h) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.2.x Pressure Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (hPa) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.3.x Temp. Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (deg C) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.4.x Water Vapor Radiometer : Manufacturer : Serial Number : Distance to Antenna : (m) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.5.x Other Instrumentation : (multiple lines) 9. Local Ongoing Conditions Possibly Affecting Computed Position 9.1.x Radio Interferences : (TV/CELL PHONE ANTENNA/RADAR/etc) Observed Degradations : (SN RATIO/DATA GAPS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.2.x Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.3.x Signal Obstructions : (TREES/BUILDINGS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 10. Local Episodic Effects Possibly Affecting Data Quality 10.x Date : (CCYY-MM-DD/CCYY-MM-DD) Event : (TREE CLEARING/CONSTRUCTION/etc) 11. On-Site, Point of Contact Agency Information Agency : Geoscience Australia Preferred Abbreviation : Mailing Address : GPO Box 378 : Canberra ACT 2601 : AUSTRALIA : Canberra : 2601 : Australia Primary Contact Contact Name : Geoscience Australia Telephone (primary) : +61 2 6249 9004 Telephone (secondary) : +61 2 6249 9111 Fax : E-mail : gnss@ga.gov.au Secondary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Additional Information : 12. Responsible Agency (if different from 11.) Agency : Geoscience Australia Preferred Abbreviation : Mailing Address : GPO Box 378 : Canberra ACT 2601 : AUSTRALIA : Canberra : 2601 : Australia Primary Contact Contact Name : Geoscience Australia Telephone (primary) : +61 2 6249 9004 Telephone (secondary) : +61 2 6249 9111 Fax : E-mail : gnss@ga.gov.au Secondary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Additional Information : 13. More Information Primary Data Center : GA Secondary Data Center : CDDIS URL for More Information : http://www.ga.gov.au Hardcopy on File Site Map : Y Site Diagram : Y Horizon Mask : Y Monument Description : Y Site Pictures : Y Additional Information : Antenna Graphics with Dimensions (insert text graphic from file antenna.gra)