DUBO Site Information Form International GPS Service See Instructions at: ftp://igscb.jpl.nasa.gov/pub/station/general/sitelog_instr.txt 0. Form Prepared by (full name) : Michael Schmidt Date Prepared : 2002-04-03 Report Type : UPDATE If Update: Previous Site Log : dubo0204.log Modified/Added Sections : (n.n,n.n,...) 1. Site Identification of the GNSS Monument Site Name : Lac du Bonnet Four Character ID : DUBO Monument Inscription : 924000 IERS DOMES Number : 40137M001 CDP Number : (A4) Monument Description : (PILLAR/BRASS PLATE/STEEL MAST/etc) Height of the Monument : (m) Monument Foundation : (STEEL RODS, CONCRETE BLOCK, ROOF, etc) Foundation Depth : (m) Marker Description : (CHISELLED CROSS/DIVOT/BRASS NAIL/etc) Date Installed : 1996-10-18T16:00Z Geologic Characteristic : BEDROCK Bedrock Type : GRANITE Bedrock Condition : WEATHERED Fracture Spacing : over 200 cm Fault zones nearby : (YES/NO/Name of the zone) Distance/activity : (multiple lines) Additional Information : (multiple lines) : This station is part of the Western Canada : Deformation Array (WCDA) as well as the : Canadian Active Control System (CACS). : The following information is current as of 2. Site Location Information City or Town : Lac du Bonnet State or Province : Manitoba Country : Canada Tectonic Plate : North America Approximate Position (ITRF) X coordinate (m) : -417603.5980 Y coordinate (m) : -4064529.8010 Z coordinate (m) : 4881432.1606 Latitude (N is +) : +501531.68 Longitude (E is +) : -0955158.32 Elevation (m,ellips.) : +251.0 Additional Information : (multiple lines) 3. GNSS Receiver Information 3.1 Receiver Type : ROGUE SNR-8000 Satellite System : (GPS/GLONASS/GPS+GLONASS) Serial Number : 207 UNAVCO 8765 Firmware Version : 3.2 Lk 95/03/09 Elevation Cutoff Setting : (deg) Date Installed : 1996-10-18T16:00Z Date Removed : 1999-05-26T18:00Z Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : 3.2 Receiver Type : ROGUE SNR-8000 Satellite System : (GPS/GLONASS/GPS+GLONASS) Serial Number : 207 UNAVCO 8765 Firmware Version : 3.2.32.8 lk 98/12/28 Elevation Cutoff Setting : (deg) Date Installed : 1999-05-26T18:03Z Date Removed : 1999-08-18T22:12Z Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : 3.3 Receiver Type : ROGUE SNR-8000 Satellite System : (GPS/GLONASS/GPS+GLONASS) Serial Number : 158 Firmware Version : 3.2.32.8 lk 98/12/28 Elevation Cutoff Setting : (deg) Date Installed : 1999-10-04T21:46Z Date Removed : 2000-10-12T17:20Z Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : 3.4 Receiver Type : ROGUE SNR-8000 Satellite System : (GPS/GLONASS/GPS+GLONASS) Serial Number : T323 Firmware Version : 3.2.32.8 lk 98/12/28 Elevation Cutoff Setting : (deg) Date Installed : 2000-10-12T18:59Z Date Removed : 2001-01-23T19:22Z Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : 3.5 Receiver Type : ROGUE SNR-8000 Satellite System : (GPS/GLONASS/GPS+GLONASS) Serial Number : T386 Firmware Version : 3.2.32.11 Elevation Cutoff Setting : (deg) Date Installed : 2001-01-23T20:04Z Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : 3.x Receiver Type : (A20, from rcvr_ant.tab; see instructions) Satellite System : (GPS/GLONASS/GPS+GLONASS) Serial Number : (A5) Firmware Version : (A11) Elevation Cutoff Setting : (deg) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : (multiple lines) 4. GNSS Antenna Information 4.1 Antenna Type : AOAD/M_T Serial Number : 236 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 0.100 Marker->ARP North Ecc(m) : (F8.4) Marker->ARP East Ecc(m) : (F8.4) Alignment from True N : 0 Antenna Radome Type : Radome Serial Number : Antenna Cable Type : (vendor & type number) Antenna Cable Length : (m) Date Installed : 1996-10-18T16:00Z Date Removed : 1997-01-08T19:50Z Additional Information : antenna mount - 10 cm anodized aluminum base : RF skirt placed around base of antenna s.t. : top of pier covered : ref. Antenna Diagram 'A' below : degrees offset from North refers to 'True : North' : Antenna p/n 7490400-2 4.2 Antenna Type : AOAD/M_T EMRA Serial Number : 236 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 0.100 Marker->ARP North Ecc(m) : (F8.4) Marker->ARP East Ecc(m) : (F8.4) Alignment from True N : 0 Antenna Radome Type : EMRA Radome Serial Number : Antenna Cable Type : (vendor & type number) Antenna Cable Length : (m) Date Installed : 1997-01-08T19:50Z Date Removed : 1999-08-18T22:12Z Additional Information : radome placed over top of antenna / choke : ring : ref. Antenna Diagram 'B' below : degrees offset from North refers to 'True : North' : The dome is installed using an aluminum : flange ring attached to the choke ring. : The flange ring extends the radius of the : ground plane by 2.5 cm. : Antenna p/n 7490400-2 4.3 Antenna Type : AOAD/M_T SCIS Serial Number : 98381 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 0.100 Marker->ARP North Ecc(m) : (F8.4) Marker->ARP East Ecc(m) : (F8.4) Alignment from True N : 0 Antenna Radome Type : SCIS Radome Serial Number : Antenna Cable Type : (vendor & type number) Antenna Cable Length : (m) Date Installed : 1999-10-04T21:46Z Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : Acrylic dome replaced by SCIGN dome : ref. Antenna Diagram 'C' below : degrees offset from North refers to 'True : North' : Antenna p/n 7490582-2 4.x Antenna Type : (A20, from rcvr_ant.tab; see instructions) Serial Number : (A*, but note the first A5 is used in SINEX) Antenna Reference Point : (BPA/BCR/XXX from "antenna.gra"; see instr.) Marker->ARP Up Ecc. (m) : (F8.4) Marker->ARP North Ecc(m) : (F8.4) Marker->ARP East Ecc(m) : (F8.4) Alignment from True N : (deg; + is clockwise/east) Antenna Radome Type : (A4 from rcvr_ant.tab; see instructions) Radome Serial Number : Antenna Cable Type : (vendor & type number) Antenna Cable Length : (m) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 5. Surveyed Local Ties 5.x Tied Marker Name : Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc) Tied Marker CDP Number : (A4) Tied Marker DOMES Number : (A9) Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : dy (m) : dz (m) : Accuracy (mm) : (mm) Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc) Date Measured : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 6. Frequency Standard 6.1 Standard Type : INTERNAL Input Frequency : Effective Dates : 1996-10-18/CCYY-MM-DD Notes : currently used 6.x Standard Type : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc) Input Frequency : (if external) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 7. Collocation Information 7.1 Instrumentation Type : Absolute Gravity Status : MOBILE Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : contact GSC for more information 7.x Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc) Status : (PERMANENT/MOBILE) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8. Meteorological Instrumentation 8.1.x Humidity Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy (% rel h) : (% rel h) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.2.x Pressure Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (hPa) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.3.x Temp. Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (hPa) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.4.x Water Vapor Radiometer : Manufacturer : Serial Number : Distance to Antenna : (m) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.5.x Other Instrumentation : 9. Local Ongoing Conditions Possibly Affecting Computed Position 9.1.x Radio Interferences : (TV/CELL PHONE ANTENNA/RADAR/etc) Observed Degredations : (SN RATIO/DATA GAPS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.2.x Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.3.x Signal Obstructions : (TREES/BUILDLINGS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 10. Local Episodic Effects Possibly Affecting Data Quality 10.x Date : (CCYY-MM-DD/CCYY-MM-DD) Event : (TREE CLEARING/CONSTRUCTION/etc) 11. On-Site, Point of Contact Agency Information Agency : Geological Survey of Canada Preferred Abbreviation : (A10) Mailing Address : P.O. Box 6000 : 9860 West Saanich Rd. : Sidney, B.C. : Canada V8L 4B2 Primary Contact Contact Name : Michael Schmidt Telephone (primary) : 250-363-6760 Telephone (secondary) : 250-363-6500 Fax : 250-363-6565 E-mail : schmidt@pgc.nrcan.gc.ca Secondary Contact Contact Name : Herb Dragert Telephone (primary) : 250-363-6447 Telephone (secondary) : 250-363-6500 Fax : 250-363-6565 E-mail : dragert@pgc.nrcan.gc.ca Additional Information : (multiple lines) 12. Responsible Agency (if different from 11.) Agency : (multiple lines) Preferred Abbreviation : (A10) Mailing Address : (multiple lines) Primary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Secondary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Additional Information : (multiple lines) 13. More Information URL for More Information : www.pgc.nrcan.gc.ca/geodyn/geodyn.htm Hardcopy on File Site Map : (Y or URL) Site Diagram : (Y) Horizon Mask : (Y) Monument Description : (Y) Site Pictures : (Y) Additional Information : Hardcopy Information available from www site : or site contact Antenna Graphics with Dimensions Antenna Diagram A ***************** TURBOROGUE: AOAD/M_T (Allen Osborne Design) (not to scale) ----- / + \ <- 0.128 L2 | + | <- 0.110 L1 +-----------------------------------------------+ <- 0.102 TCR | | | | | | | | +-+------------------------------------------------+-+ <- 0.038 | ------------------+-------------+------------------+ | .<- 0.035 BCR | | | | | | | | | +------X------+ <------ | <- 0.000 ARP | * * | | | * * | |< metal screen | * * | | (RF Skirt) | * * 10cm | | * * | | | * * | | [---------------------*------#------*-------------------] TOP OF [ ] CONCRETE [ ] PIER [ ] [ ] Antenna Diagram B ***************** TURBOROGUE: AOAD/M_T (Allen Osborne Design) (not to scale) . . . . . . . .<- ACRYLIC DOME . ----- . (EMRA) . / + \ . <- 0.128 L2 . | + | .<- 0.110 L1 . +-----------------------------------------------+ <- 0.102 TCR . | | . . | | . . | | . . | | . . +-+------------------------------------------------+-+ . <- 0.038 ... +-------------------+-------------+------------------+ <- 0.035 BCR |======FLANGE======= | | =======RING=======| | | | | | +------X------+ <------ 0.000 ARP | | * * | | | * * | | | * * | |< metal | * * 10cm | screen | * * | |RF skirt | * * | | [---------------------* ------#-----*--------------------]<-TOP OF [ ]CONCRETE [ ] PIER [ ] [ ] Antenna Diagram C ***************** TURBOROGUE: AOAD/M_T (Allen Osborne Design) (not to scale) . . . . . . . . . . . . . . . . <-- DOME (SCIS) . . . . . . . . . . . . ----- . . . . / + \ .<- 0.128 L2 . | + | .<- 0.110 L1 . +-----------------------------------------------+ .<- 0.102 TCR . | | . . | | . . | | . . | | . . +-+------------------------------------------------+-+ .<- 0.038 . +-------------------+-------------+------------------+ .<- 0.035 BCR | | | | | | | | | +------X------+ <----- 0.000 ARP | | * * | | | * * | | | * * | |< metal | * * 10cm | screen | * * | |RF skirt | * * | | [---------------------*------#------*--------------------]<-TOP OF [ ]CONCRETE [ ] PIER [ ] [ ] # ... Monument Reference Point X ... Antenna Reference Point (ARP) L1 : L1 Phase Center L2 : L2 Phase Center TCR: Top of Chokering BCR: Bottom of Chokering