CUIB00BRA Site Information Form (site log) International GNSS Service See Instructions at: https://files.igs.org/pub/station/general/sitelog_instr.txt 0. Form Prepared by (full name) : IBGE Date Prepared : 2023-02-28 Report Type : UPDATE If Update: Previous Site Log : cuib_20230122.log Modified/Added Sections : 3.10 1. Site Identification of the GNSS Monument Site Name : CUIABA Four Character ID : CUIB Monument Inscription : IERS DOMES Number : 41603M001 CDP Number : Monument Description : CONCRETE Height of the Monument : Monument Foundation : ROOF Foundation Depth : Marker Description : Date Installed : 1997-06-18T00:00Z Geologic Characteristic : Bedrock Type : Bedrock Condition : Fracture Spacing : Fault zones nearby : Distance/activity : Additional Information : 2. Site Location Information City or Town : Cuiaba State or Province : Mato Grosso Country : Brazil Tectonic Plate : SOUTH AMERICAN Approximate Position (ITRF) X coordinate (m) : 3430711.4 Y coordinate (m) : -5099641.5 Z coordinate (m) : -1699432.9 Latitude (N is +) : -153318.94 Longitude (E is +) : -0560411.51 Elevation (m,ellips.) : 237.4 Additional Information : 3. GNSS Receiver Information 3.1 Receiver Type : TRIMBLE 4000SSI Satellite System : GPS Serial Number : 16741 Firmware Version : 7.22 Elevation Cutoff Setting : 0 deg Date Installed : 1997-06-18T00:00Z Date Removed : 1999-08-19T23:59Z Temperature Stabiliz. : Additional Information : 3.2 Receiver Type : TRIMBLE 4000SSI Satellite System : GPS Serial Number : 16741 Firmware Version : 7.29 Elevation Cutoff Setting : 0 deg Date Installed : 1999-08-20T00:00Z Date Removed : 2007-03-30T00:00Z Temperature Stabiliz. : Additional Information : 3.3 Receiver Type : TRIMBLE NETRS Satellite System : GPS Serial Number : 4643124418 Firmware Version : 1.1 – 5 Elevation Cutoff Setting : 0 deg Date Installed : 2007-03-31T00:00Z Date Removed : 2008-06-03T00:00Z Temperature Stabiliz. : Additional Information : 3.4 Receiver Type : TRIMBLE NETRS Satellite System : GPS Serial Number : 4643124418 Firmware Version : 1.2 – 0 Elevation Cutoff Setting : 0 deg Date Installed : 2008-06-03T00:00Z Date Removed : 2012-11-22T15:00Z Temperature Stabiliz. : Additional Information : 3.5 Receiver Type : TRIMBLE NETR8 Satellite System : GPS+GLO Serial Number : 4923K35518 Firmware Version : 4.41 Elevation Cutoff Setting : 0 deg Date Installed : 2012-11-22T15:20Z Date Removed : 2013-03-15T11:40Z Temperature Stabiliz. : Additional Information : 3.6 Receiver Type : TRIMBLE NETR8 Satellite System : GPS+GLO Serial Number : 4923K35518 Firmware Version : 4.70 Elevation Cutoff Setting : 0 deg Date Installed : 2013-03-15T11:45Z Date Removed : 2014-09-17T11:00Z Temperature Stabiliz. : Additional Information : 3.7 Receiver Type : TRIMBLE NETR8 Satellite System : GPS+GLO Serial Number : 4923K35518 Firmware Version : 4.85 Elevation Cutoff Setting : 0 deg Date Installed : 2014-09-17T11:11Z Date Removed : 2020-02-13T14:59Z Temperature Stabiliz. : Additional Information : 3.8 Receiver Type : SEPT POLARX5S Satellite System : GPS+GLO+GAL+BDS Serial Number : 4601379 Firmware Version : 5.3.2 Elevation Cutoff Setting : 0 deg Date Installed : 2020-02-13T18:00Z Date Removed : 2021-02-09T15:10Z Temperature Stabiliz. : Additional Information : 3.9 Receiver Type : SEPT POLARX5S Satellite System : GPS+GLO+GAL+BDS+SBAS Serial Number : 4601379 Firmware Version : 5.4.0 Elevation Cutoff Setting : 0 deg Date Installed : 2021-02-09T15:15Z Date Removed : 2023-02-28T15:10Z Temperature Stabiliz. : Additional Information : 3.10 Receiver Type : SEPT POLARX5S Satellite System : GPS+GLO+GAL+BDS+SBAS Serial Number : 4601379 Firmware Version : 5.5.0 Elevation Cutoff Setting : 0 deg Date Installed : 2023-02-28T15:15Z Date Removed : CCYY-MM-DDThh:mmZ Temperature Stabiliz. : Additional Information : 3.x Receiver Type : (A20, from rcvr_ant.tab; see instructions) Satellite System : (GPS+GLO+GAL+BDS+QZSS+SBAS) Serial Number : (A20, but note the first A5 is used in SINEX) Firmware Version : (A11) Elevation Cutoff Setting : (deg) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : (multiple lines) 4. GNSS Antenna Information 4.1 Antenna Type : TRM29659.00 NONE Serial Number : 070176 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 0.0080 Marker->ARP North Ecc(m) : 0.0000 Marker->ARP East Ecc(m) : 0.0000 Alignment from True N : 0 deg Antenna Radome Type : NONE Radome Serial Number : Antenna Cable Type : Antenna Cable Length : Date Installed : 1997-06-18T00:00Z Date Removed : 2007-03-30T00:00Z Additional Information : 4.2 Antenna Type : TRM41249.00 NONE Serial Number : 60183385 Antenna Reference Point : BAM Marker->ARP Up Ecc. (m) : 0.0080 Marker->ARP North Ecc(m) : 0.0000 Marker->ARP East Ecc(m) : 0.0000 Alignment from True N : 0 deg Antenna Radome Type : NONE Radome Serial Number : Antenna Cable Type : Antenna Cable Length : Date Installed : 2007-03-31T00:00Z Date Removed : 2012-11-22T15:00Z Additional Information : 4.3 Antenna Type : TRM59800.00 NONE Serial Number : 4951353654 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 0.0080 Marker->ARP North Ecc(m) : 0.0000 Marker->ARP East Ecc(m) : 0.0000 Alignment from True N : 0 deg Antenna Radome Type : NONE Radome Serial Number : Antenna Cable Type : Antenna Cable Length : Date Installed : 2012-11-22T15:20Z Date Removed : 2014-11-14T15:50Z Additional Information : 4.4 Antenna Type : TRM59800.00 NONE Serial Number : 4951353659 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 0.0080 Marker->ARP North Ecc(m) : 0.0000 Marker->ARP East Ecc(m) : 0.0000 Alignment from True N : 0 deg Antenna Radome Type : NONE Radome Serial Number : Antenna Cable Type : Antenna Cable Length : Date Installed : 2014-11-14T16:05Z Date Removed : 2020-02-13T14:59Z Additional Information : 4.5 Antenna Type : SEPCHOKE_B3E6 SPKE Serial Number : 5629 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 0.0080 Marker->ARP North Ecc(m) : 0.0000 Marker->ARP East Ecc(m) : 0.0000 Alignment from True N : 0 deg Antenna Radome Type : SPKE Radome Serial Number : Antenna Cable Type : Antenna Cable Length : Date Installed : 2020-02-13T18:00Z Date Removed : CCYY-MM-DDThh:mmZ Additional Information : ARP changed from BAM to BPA in 2023-01-24 4.x Antenna Type : (A20, from rcvr_ant.tab; see instructions) Serial Number : (A*, but note the first A5 is used in SINEX) Antenna Reference Point : (BPA/BCR/XXX from "antenna.gra"; see instr.) Marker->ARP Up Ecc. (m) : (F8.4) Marker->ARP North Ecc(m) : (F8.4) Marker->ARP East Ecc(m) : (F8.4) Alignment from True N : (deg; + is clockwise/east) Antenna Radome Type : (A4 from rcvr_ant.tab; see instructions) Radome Serial Number : Antenna Cable Type : (vendor & type number) Antenna Cable Length : (m) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 5. Surveyed Local Ties 5.x Tied Marker Name : Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc) Tied Marker CDP Number : (A4) Tied Marker DOMES Number : (A9) Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : (m) dy (m) : (m) dz (m) : (m) Accuracy (mm) : (mm) Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc) Date Measured : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 6. Frequency Standard 6.1 Standard Type : INTERNAL Input Frequency : Effective Dates : 1997-06-18/CCYY-MM-DD Notes : 6.x Standard Type : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc) Input Frequency : (if external) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 7. Collocation Information 7.x Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc) Status : (PERMANENT/MOBILE) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8. Meteorological Instrumentation 8.1.x Humidity Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy (% rel h) : (% rel h) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.2.x Pressure Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (hPa) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.3.x Temp. Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (deg C) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.4.x Water Vapor Radiometer : Manufacturer : Serial Number : Distance to Antenna : (m) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.5.x Other Instrumentation : (multiple lines) 9. Local Ongoing Conditions Possibly Affecting Computed Position 9.1.x Radio Interferences : (TV/CELL PHONE ANTENNA/RADAR/etc) Observed Degradations : (SN RATIO/DATA GAPS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.2.x Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.3.1 Signal Obstructions : Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : 9.3.x Signal Obstructions : (TREES/BUILDINGS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 10. Local Episodic Effects Possibly Affecting Data Quality 10.x Date : (CCYY-MM-DD/CCYY-MM-DD) Event : (TREE CLEARING/CONSTRUCTION/etc) 11. On-Site, Point of Contact Agency Information Agency : Instituto Brasileiro de Geografia e Estatistica : Brazilian Institute of Geography and Statistics) Preferred Abbreviation : IBGE Mailing Address : Avenida Republica do Chile, 500 - CEP 20031-170 : Rio de Janeiro - RJ - Brazil Primary Contact Contact Name : IBGE Telephone (primary) : Telephone (secondary) : Fax : E-mail : rbmc@ibge.gov.br Secondary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Additional Information : 12. Responsible Agency (if different from 11.) Agency : Preferred Abbreviation : Mailing Address : Primary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Secondary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Additional Information : 13. More Information Primary Data Center : https://geoftp.ibge.gov.br/informacoes_sobre_ Secondary Data Center : URL for More Information : Hardcopy on File Site Map : Site Diagram : Horizon Mask : Monument Description : Site Pictures : Additional Information : Antenna Graphics with Dimensions (insert text graphic from file antenna.gra) Dorne Margolin T ------- / + \ <-- 0.136m L2 | + | <-- 0.118m L1 +----------------------------------------+ <-- 0.110m TCR | | | | | | | | +-+----------------------------------------+-+ <-- 0.046m +--------------+-------------+---------------+ <-- 0.043m BCR | | | +-+ | +-----|x|-----+ <-- 0.008m ARP +-+-+-+ <-- 0.000m | | +----+-----+----+ <-- Monument Concrete Pillar | | | | | | ARP: Antenna Reference Point L1 : L1 Phase Center TCR: Top of Chokering L2 : L2 Phase Center BCR: Botton of Chokering <-- 0.381 --> TRM41249.00 / ----------------------+--------------------- \ <-- 0.0714 L1 + + + <-- 0.0682 L2 \ -------------------------------------------- / \ / \ / \-----+-----/ <-- 0.0000 ARP=BAM <-- 0.3396 --> ARP: Antenna Reference Point L1 : L1 Phase Center L2 : L2 Phase Center TCR: Top of Chokering BCR: Bottom of Chokering TRM29659.00 TRM59800.00 TRM59800.80 TRM59900.00 ----- / \ | | +-------------------------------------------------+ <-- 0.1020 TCR | | | | | | | | +-+-------------------------------------------------+-+ <-- 0.0381 +-------------------+-------------+-------------------+ <-- 0.0350 BCR | | =| | +------x------+ <-- 0.0000 BPA=ARP <-- 0.3810 --> SEPCHOKE_B3E6 --------------- <-- 0.1550 / \ | | +-----------------------------------------------------+ <-- 0.1080 TCR | | | | | | | | +-----------------+-----------------+-----------------+ <-- 0.0480 BCR | | | | | | +--------x--------+ <-- 0.0000 BPA=ARP (5/8" thread might differ from BPA!) NOM=NRP <-- 0.1210 --> <-- 0.3630 --> Changes: 16-Sep-2020: ARP changed from BAM to BPA