CORD00ARG Site Information Form (site log) International GNSS Service See Instructions at: https://files.igs.org/pub/station/general/sitelog_instr.txt 0. Form Prepared by (full name) : Jacob Sklar Date Prepared : 2022-12-16 Report Type : UPDATE If Update: Previous Site Log : cord00arg_20220801.log Modified/Added Sections : 8.1.1, 8.2.1, 8.3.1, 12 1. Site Identification of the GNSS Monument Site Name : Cordoba Four Character ID : CORD Monument Inscription : IERS DOMES Number : 41511M001 CDP Number : Monument Description : Stainless steel pin w/ tread and dimple as mark Height of the Monument : 0.05 m Monument Foundation : cemented in concrete roof structure Foundation Depth : 0.20 m Marker Description : Dimple in s-s pin. Date Installed : 1999-07-27T00:00Z Geologic Characteristic : Bedrock Type : Bedrock Condition : Fracture Spacing : Fault zones nearby : Distance/activity : Additional Information : (multiple lines) : CONAE building foundation rests on bedrock : as verified by local geologist who also : identified basement crystalline material : at site. The monument consists of a conquest : pin cemented in the top of a corner column of : the building. It is a 1 inch stainless steel : pin with tread and dimple as mark. A leveling : mount is installed on the conquest pin. : Mark is the center point of the pin. : Station was decomissioned 2010 : and is recomissioned 2013 2. Site Location Information City or Town : Cordoba State or Province : Country : Argentina Tectonic Plate : SOUTH AMERICAN Approximate Position (ITRF) X coordinate (m) : 2345503.9452 Y coordinate (m) : -4910842.9601 Z coordinate (m) : -3316365.5474 Latitude (N is +) : -313142.3681 Longitude (E is +) : -0642812.1737 Elevation (m,ellips.) : 747.0654 Additional Information : WGS84 3. GNSS Receiver Information 3.1 Receiver Type : ROGUE SNR-8000 Satellite System : GPS Serial Number : 375 Firmware Version : 3.2.32.8 Elevation Cutoff Setting : 4 deg Date Installed : 1999-07-27T00:00Z Date Removed : 2000-08-16T00:00Z Temperature Stabiliz. : none Additional Information : UNAVCO #70014 3.2 Receiver Type : ROGUE SNR-8000 Satellite System : GPS Serial Number : 375 Firmware Version : 3.2.32.8 1s soc2rnx Elevation Cutoff Setting : 4 deg Date Installed : 2000-08-16T00:00Z Date Removed : 2003-04-21T14:00Z Temperature Stabiliz. : none Additional Information : UNAVCO #70014 : samplerate - 1s : offload format - soc : conversion to 30s - soc2rnx 3.3 Receiver Type : ROGUE SNR-8000 Satellite System : GPS Serial Number : 375 Firmware Version : 3.2.32.11 Elevation Cutoff Setting : 4 deg Date Installed : 2003-04-21T20:00Z Date Removed : 2005-03-03T00:00Z Temperature Stabiliz. : none Additional Information : Firmware version update : offload format - trb 3.4 Receiver Type : ASHTECH UZ-12 Satellite System : GPS Serial Number : UC1200325010 Firmware Version : CN00 Elevation Cutoff Setting : 4 deg Date Installed : 2005-03-03T00:00Z Date Removed : 2010-10-12T00:00Z Temperature Stabiliz. : none Additional Information : UNAVCO# 71033 : Station is decomissioned 3.5 Receiver Type : JAVAD TRE_G3TH DELTA Satellite System : GPS+GLO Serial Number : 00892 Firmware Version : 3.4.9 Elevation Cutoff Setting : 4 deg Date Installed : 2013-08-28T00:00Z Date Removed : 2014-04-25T18:44Z Temperature Stabiliz. : none Additional Information : Station recomissioned 3.6 Receiver Type : JAVAD TRE_G3TH DELTA Satellite System : GPS+GLO Serial Number : 00892 Firmware Version : 3.5.5 Elevation Cutoff Setting : 0 deg Date Installed : 2014-04-25T18:45Z Date Removed : 2015-07-15T16:51Z Temperature Stabiliz. : none Additional Information : no Beidou or QZSS for tracking 3.7 Receiver Type : JAVAD TRE_G3TH DELTA Satellite System : GPS+GLO Serial Number : 00892 Firmware Version : 3.5.9 Elevation Cutoff Setting : 0 deg Date Installed : 2015-07-15T17:50Z Date Removed : 2016-03-22T18:02Z Temperature Stabiliz. : none Additional Information : no Beidou or QZSS for tracking 3.8 Receiver Type : JAVAD TRE_G3TH DELTA Satellite System : GPS+GLO Serial Number : 00892 Firmware Version : 3.6.4 Elevation Cutoff Setting : 0 deg Date Installed : 2016-03-22T18:11Z Date Removed : 2018-08-28T20:09Z Temperature Stabiliz. : none Additional Information : no Beidou or QZSS for tracking : SBAS off : L1 center frq 1573 3.9 Receiver Type : JAVAD TRE_G3TH DELTA Satellite System : GPS+GLO+GAL Serial Number : 00892 Firmware Version : 3.7.2 Elevation Cutoff Setting : 0 deg Date Installed : 2018-08-28T20:12Z Date Removed : 2019-05-23T17:53Z Temperature Stabiliz. : none Additional Information : 3.10 Receiver Type : JAVAD TRE_G3TH DELTA Satellite System : GPS+GLO+GAL Serial Number : 00892 Firmware Version : 3.7.6 Elevation Cutoff Setting : 0 deg Date Installed : 2019-05-23T17:53Z Date Removed : 2020-03-24T17:05Z Temperature Stabiliz. : none Additional Information : 3.11 Receiver Type : JAVAD TRE_G3TH DELTA Satellite System : GPS+GLO+GAL Serial Number : 00892 Firmware Version : 3.7.9 Elevation Cutoff Setting : 0 deg Date Installed : 2020-03-24T17:05Z Date Removed : 2021-03-12T01:40Z Temperature Stabiliz. : none Additional Information : 3.12 Receiver Type : JAVAD TRE_G3TH DELTA Satellite System : GPS+GLO+GAL Serial Number : 00892 Firmware Version : 4.0.02 Elevation Cutoff Setting : 0 deg Date Installed : 2021-03-12T01:40Z Date Removed : 2021-07-15T00:36Z Temperature Stabiliz. : none Additional Information : 3.13 Receiver Type : JAVAD TRE_G3TH DELTA Satellite System : GPS+GLO+GAL Serial Number : 00892 Firmware Version : 4.1.01 Elevation Cutoff Setting : 0 deg Date Installed : 2021-07-15T00:36Z Date Removed : 2022-08-01T17:00Z Temperature Stabiliz. : none Additional Information : BDS tracking disabled. 3.14 Receiver Type : SEPT POLARX5 Satellite System : GPS+GLO+GAL+BDS Serial Number : 3025646 Firmware Version : 5.4.0-patch1 Elevation Cutoff Setting : 0 deg Date Installed : 2022-08-01T17:30Z Date Removed : CCYY-MM-DDThh:mmZ Temperature Stabiliz. : Additional Information : 3.x Receiver Type : (A20, from rcvr_ant.tab; see instructions) Satellite System : (GPS+GLO+GAL+BDS+QZSS+SBAS) Serial Number : (A20, but note the first A5 is used in SINEX) Firmware Version : (A11) Elevation Cutoff Setting : (deg) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : (multiple lines) 4. GNSS Antenna Information 4.1 Antenna Type : AOAD/M_T NONE Serial Number : 118 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 0.0792 Marker->ARP North Ecc(m) : 0.0000 Marker->ARP East Ecc(m) : 0.0000 Alignment from True N : 0 deg Antenna Radome Type : NONE Radome Serial Number : Antenna Cable Type : Antenna Cable Length : Date Installed : 1999-07-27T00:00Z Date Removed : 2005-03-03T00:00Z Additional Information : Height measured true vertical to : antenna reference plane for an AOAD/M_T : chokering antenna (7.92 cm) : UNAVCO #8038. 4.2 Antenna Type : ASH701945G_M NONE Serial Number : CR6200342009 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 0.0792 Marker->ARP North Ecc(m) : 0.0000 Marker->ARP East Ecc(m) : 0.0000 Alignment from True N : 0 deg Antenna Radome Type : NONE Radome Serial Number : Antenna Cable Type : Antenna Cable Length : Date Installed : 2005-03-03T00:00Z Date Removed : 2010-10-12T00:00Z Additional Information : Height measured true vertical to : antenna reference pooint (ARP=BPA). : UNAVCO # 71030 : Station is decomissioned 4.3 Antenna Type : TPSCR.G3 NONE Serial Number : 383-0362 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 0.0922 Marker->ARP North Ecc(m) : 0.0000 Marker->ARP East Ecc(m) : 0.0000 Alignment from True N : 0 deg Antenna Radome Type : NONE Radome Serial Number : Antenna Cable Type : Antenna Cable Length : Date Installed : 2013-08-28T00:00Z Date Removed : CCYY-MM-DDThh:mmZ Additional Information : Height measured true vertical to : antenna reference point (ARP=BPA). : Station recomissioned 4.x Antenna Type : (A20, from rcvr_ant.tab; see instructions) Serial Number : (A*, but note the first A5 is used in SINEX) Antenna Reference Point : (BPA/BCR/XXX from "antenna.gra"; see instr.) Marker->ARP Up Ecc. (m) : (F8.4) Marker->ARP North Ecc(m) : (F8.4) Marker->ARP East Ecc(m) : (F8.4) Alignment from True N : (deg; + is clockwise/east) Antenna Radome Type : (A4 from rcvr_ant.tab; see instructions) Radome Serial Number : Antenna Cable Type : (vendor & type number) Antenna Cable Length : (m) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 5. Surveyed Local Ties 5.x Tied Marker Name : Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc) Tied Marker CDP Number : (A4) Tied Marker DOMES Number : (A9) Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : (m) dy (m) : (m) dz (m) : (m) Accuracy (mm) : (mm) Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc) Date Measured : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 6. Frequency Standard 6.1 Standard Type : INTERNAL Input Frequency : Effective Dates : 1999-07-27/CCYY-MM-DD Notes : 6.x Standard Type : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc) Input Frequency : (if external) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 7. Collocation Information 7.x Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc) Status : (PERMANENT/MOBILE) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8. Meteorological Instrumentation 8.1.1 Humidity Sensor Model : MET4 Manufacturer : Paroscientific Serial Number : 155025 Data Sampling Interval : 60 sec Accuracy (% rel h) : 1.0 Aspiration : UNASPIRATED Height Diff to Ant : 0.565 m Calibration date : (CCYY-MM-DD) Effective Dates : 2022-12-16/CCYY-MM-DD Notes : 8.1.x Humidity Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy (% rel h) : (% rel h) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.2.1 Pressure Sensor Model : MET4 Manufacturer : Paroscientific Serial Number : 155025 Data Sampling Interval : 60 sec Accuracy : 0.1 hPa Height Diff to Ant : 0.565 m Calibration date : (CCYY-MM-DD) Effective Dates : 2022-12-16/CCYY-MM-DD Notes : 8.2.x Pressure Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (hPa) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.3.1 Temp. Sensor Model : MET4 Manufacturer : Paroscientific Serial Number : 155025 Data Sampling Interval : 60 sec Accuracy : 0.5 deg C Aspiration : UNASPIRATED Height Diff to Ant : 0.565 m Calibration date : Effective Dates : 2022-12-16/CCYY-MM-DD Notes : 8.3.x Temp. Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (deg C) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.4.x Water Vapor Radiometer : Manufacturer : Serial Number : Distance to Antenna : (m) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.5.x Other Instrumentation : (multiple lines) 9. Local Ongoing Conditions Possibly Affecting Computed Position 9.1.x Radio Interferences : (TV/CELL PHONE ANTENNA/RADAR/etc) Observed Degradations : (SN RATIO/DATA GAPS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.2.x Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.3.x Signal Obstructions : (TREES/BUILDINGS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 10. Local Episodic Effects Possibly Affecting Data Quality 10.x Date : (CCYY-MM-DD/CCYY-MM-DD) Event : (TREE CLEARING/CONSTRUCTION/etc) 11. On-Site, Point of Contact Agency Information Agency : Comision Nacional de Actividades : Espaciales Preferred Abbreviation : CONAE Mailing Address : Avenida Paseo Colón 751 : 1063 Ciudad De Buenos Aires : Argentinia Primary Contact Contact Name : CONAE point of contact Telephone (primary) : +54 11 4331-0074 Telephone (secondary) : Fax : (54)-3547-42-2713 E-mail : Secondary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Additional Information : 12. Responsible Agency (if different from 11.) Agency : Jet Propulsion Laboratory Preferred Abbreviation : JPL Mailing Address : 4800 Oak Grove Drive : Pasadena, CA 91109 USA Primary Contact Contact Name : JPL point of contact Telephone (primary) : 818-354-7055 Telephone (secondary) : Fax : 818-393-4965 E-mail : ggnops@jpl.nasa.gov Secondary Contact Contact Name : Earthscope Consortium Network Engineer Telephone (primary) : 303-381-7500 Telephone (secondary) : Fax : 303-381-7451 E-mail : ggn-ops@earthscope.org Additional Information : 13. More Information Primary Data Center : JPL Secondary Data Center : CDDIS URL for More Information : Hardcopy on File Site Map : Y Site Diagram : Y Horizon Mask : Y Monument Description : Y Site Pictures : Y Additional Information : Antenna Graphics with Dimensions TPSCR.G3 +-------+ / \ | | +-----------------+-------------+-----------------+ <-- 0.1015 TCR | | | | | | | | +-+-------------------------------------------------+-+ +-------------------+-------------+-------------------+ <-- 0.0345 BCR | | | | +------x------+ <-- 0.0000 BPA=ARP <-- 0.2380 --> <-- 0.3800 -->