International GPS Service BZRG Site Information Form See Instructions at: ftp://igscb.jpl.nasa.gov/pub/station/general/sitelog_instr.txt 0. Form Prepared by (full name) : Antonino Di Girolamo Date Prepared : 2002-06-10 Report Type : UPDATE If Update: Previous Site Log : bzrg0105.log Modified/Added Sections : (n.n,n.n,...) 1. Site Identification of the GNSS Monument Site Name : Bolzano Four Character ID : BZRG Monument Inscription : Steel pillar on the roof of regional building IERS DOMES Number : 12751M001 CDP Number : (A4) Monument Description : (PILLAR/BRASS PLATE/STEEL MAST/etc) Height of the Monument : (m) Monument Foundation : (STEEL RODS, CONCRETE BLOCK, ROOF, etc) Foundation Depth : (m) Marker Description : (CHISELLED CROSS/DIVOT/BRASS NAIL/etc) Date Installed : 1997-05-14 Geologic Characteristic : (BEDROCK/CLAY/CONGLOMERATE/GRAVEL/SAND/etc) Bedrock Type : (IGNEOUS/METAMORPHIC/SEDIMENTARY) Bedrock Condition : (FRESH/JOINTED/WEATHERED) Fracture Spacing : (1-10 cm/11-50 cm/51-200 cm/over 200 cm) Fault zones nearby : (YES/NO/Name of the zone) Distance/activity : (multiple lines) Additional Information : (multiple lines) 2. Site Location Information City or Town : Bolzano State or Province : Alto Adige Country : Italy Tectonic Plate : Approximate Position (ITRF) X coordinate (m) : 4312657.7500 Y coordinate (m) : 864634.3099 Z coordinate (m) : 4603844.0502 Latitude (N is +) : +462956.40 Longitude (E is +) : +0112012.48 Elevation (m,ellips.) : 00328.8 Additional Information : (multiple lines) 3. GNSS Receiver Information 3.1 Receiver Type : LEICA SR399E Satellite System : GPS Serial Number : 61372 Firmware Version : 3.07 / 1.20 Elevation Cutoff Setting : 15 Date Installed : 1997-05-14 Date Removed : 1999-01-25T14:13Z Temperature Stabiliz. : none Additional Information : 11-SEP-1997 new Firmware Version n. 4.01 : 28-NOV-1997 new Firmware Version n. 5.02 3.2 Receiver Type : LEICA SR9500 Satellite System : GPS Serial Number : 1863 Firmware Version : 5.04 / 1.20 Elevation Cutoff Setting : 15 Date Installed : 1999-01-25T14:17Z Date Removed : 2000-11-29T09:08Z Temperature Stabiliz. : none Additional Information : 3.3 Receiver Type : LEICA CRS1000 Satellite System : GPS Serial Number : 23155 Firmware Version : 4.42 Elevation Cutoff Setting : 5 Date Installed : 2000-11-29T09:47Z Date Removed : CCYY-MM-DDThh:mmZ Temperature Stabiliz. : none Additional Information : (12 channel L1/L2,continuous reference station) 3.x Receiver Type : (A20, from rcvr_ant.tab; see instructions) Satellite System : (GPS/GLONASS/GPS+GLONASS) Serial Number : (A5) Firmware Version : (A11) Elevation Cutoff Setting : (deg) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : (multiple lines) 4. GNSS Antenna Information 4.1 Antenna Type : LEIAT303 LEIC Serial Number : 2008 Antenna Reference Point : TOP Marker->ARP Up Ecc. (m) : 000.2040 Marker->ARP North Ecc(m) : 000.0000 Marker->ARP East Ecc(m) : 000.0000 Alignment from True N : 0 Antenna Radome Type : LEIC Radome Serial Number : Antenna Cable Type : (vendor & type number) Antenna Cable Length : (m) Date Installed : 1997-05-14 Date Removed : 2000-11-29 Additional Information : In date 31-DEC-1997 mounted on the antenna a : protection's cover for the snow (RADOME). : The id of the antenna type and radome type : conforms to RCVR_ANT.TAB file as specified in : IGSMail Number 2281. : No physical chance is otherwise implied in the : location of the antenna. : LEIAT303(old id LEICA AT303)= Micropulse : antenna L1/L2, with chokerings : LEIC = dome for LEIAT303 and LEIAT503, : conical shape. : TOP of Pole = Bottom of Chokering minus 0.005m. 4.2 Antenna Type : LEIAT504 LEIS Serial Number : 00261 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 000.2120 Marker->ARP North Ecc(m) : 000.0000 Marker->ARP East Ecc(m) : 000.0000 Alignment from True N : 0 Antenna Radome Type : LEIS Radome Serial Number : Antenna Cable Type : (vendor & type number) Antenna Cable Length : (m) Date Installed : 2000-11-29 Date Removed : CCYY-MM-DDThh:mmZ Additional Information : LEIAT504 = L1/L2 Dorne Margolin antenna with : chokerings : designed after DORNE MARGOLIN T : LEIS = Dome for DORNE MARGOLIN LEICA, spherical : shape 4.x Antenna Type : (A20, from rcvr_ant.tab; see instructions) Serial Number : (A*, but note the first A5 is used in SINEX) Antenna Reference Point : (BPA/BCR/XXX from "antenna.gra"; see instr.) Marker->ARP Up Ecc. (m) : (F8.4) Marker->ARP North Ecc(m) : (F8.4) Marker->ARP East Ecc(m) : (F8.4) Alignment from True N : (deg; + is clockwise/east) Antenna Radome Type : (A4 from rcvr_ant.tab; see instructions) Radome Serial Number : Antenna Cable Type : (vendor & type number) Antenna Cable Length : (m) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 5. Surveyed Local Ties IERS DOMES Number : 12751M001 5.1 Tied Marker Name : BZRG (Stable pillar - 1997) Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc) Tied Marker CDP Number : BZRG Tied Marker DOMES Number : Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : dy (m) : dz (m) : Accuracy (mm) : (mm) Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc) Date Measured : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 5.2 Tied Marker Name : BZR0 (Marker on the top of roof) Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc) Tied Marker CDP Number : BZR0 Tied Marker DOMES Number : Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : 13.0186 dy (m) : -8.9523 dz (m) : -13.1175 Accuracy (mm) : 2 Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc) Date Measured : 1997-05-14 Additional Information : 5.3 Tied Marker Name : BZR1 (Stable pillar - 1992) Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc) Tied Marker CDP Number : BZR1 Tied Marker DOMES Number : Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : 0.1432 dy (m) : 3.4595 dz (m) : -1.1495 Accuracy (mm) : 2 Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc) Date Measured : 1997-05-14 Additional Information : 5.4 Tied Marker Name : BZR2 (Marker on the rock) Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc) Tied Marker CDP Number : BZR2 Tied Marker DOMES Number : Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : 748.538 dy (m) : 348.616 dz (m) : -1193.311 Accuracy (mm) : 6 Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc) Date Measured : 1997-05-14 Additional Information : 5.x Tied Marker Name : Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc) Tied Marker CDP Number : (A4) Tied Marker DOMES Number : (A9) Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : dy (m) : dz (m) : Accuracy (mm) : (mm) Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc) Date Measured : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 6. Frequency Standard 6.1 Standard Type : INTERNAL Input Frequency : Effective Dates : CCYY-MM-DD/CCYY-MM-DD Notes : 6.x Standard Type : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc) Input Frequency : (if external) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 7. Collocation Information 7.1 Instrumentation Type : Status : PERMANENT Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : 7.x Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc) Status : (PERMANENT/MOBILE) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8. Meteorological Instrumentation 8.1.1 Humidity Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : Accuracy (% rel h) : Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : 8.1.x Humidity Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy (% rel h) : (% rel h) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.2.x Pressure Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (hPa) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.3.x Temp. Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (hPa) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.4.x Water Vapor Radiometer : Manufacturer : Serial Number : Distance to Antenna : (m) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.5.x Other Instrumentation : 9. Local Ongoing Conditions Possibly Affecting Computed Position 9.1.x Radio Interferences : (TV/CELL PHONE ANTENNA/RADAR/etc) Observed Degredations : (SN RATIO/DATA GAPS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.2.x Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.3.x Signal Obstructions : (TREES/BUILDLINGS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 10. Local Episodic Effects Possibly Affecting Data Quality 10.x Date : (CCYY-MM-DD/CCYY-MM-DD) Event : (TREE CLEARING/CONSTRUCTION/etc) 11. On-Site, Point of Contact Agency Information Agency : Ufficio Geodetico di Bolzano : Regione Autonoma Trentino Alto Adige Preferred Abbreviation : BZgpsRATAA Mailing Address : Via Duca d'Aosta, 40 39100 Bolzano, ITALY Primary Contact Contact Name : geom. Antonino Di Girolamo Telephone (primary) : ++39.0471.290257 Telephone (secondary) : Fax : ++39.0471.290268 E-mail : Geodetico.BZ@provincia.BZ.it Secondary Contact Contact Name : geom. Nuccio Di Sclafani Telephone (primary) : ++39.0471.290284 Telephone (secondary) : Fax : ++39.0471.290268 E-mail : nsclafani@bz.regione.taa.it Additional Information : (multiple lines) 12. Responsible Agency (if different from 11.) Agency : (multiple lines) Preferred Abbreviation : (A10) Mailing Address : (multiple lines) Primary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Secondary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Additional Information : (multiple lines) 13. More Information Primary Data Center : ASI Secondary Data Center : OLG URL for More Information : Hardcopy on File Site Map : (Y or URL) Site Diagram : X Horizon Mask : X Monument Description : X Site Pictures : X Additional Information : Survey of site Antenna Graphics with Dimensions LEIAT504 L1/L2 Dorne Margolin antenna with chokerings (designed after DORNE MARGOLIN T) +-------+ <-- 0.1393 / + \ <-- 0.1282 L2 | + | <-- 0.1093 L1 +-----------------+-------------+------------------+ <-- 0.1020 TCR | | | | | | | | +-+--------------------------------------------------+-+ <-- 0.0380 +-------------------+-------------+--------------------+ <-- 0.1020 BCR | | | | +------x------+ + <-- 0.000 BPA=ARP ! ! | ! ! | ! ! | ! ! | ! ! | ! ! | ! ! | ! ! | antenna height = +---------------------------------------------+ | 0.212 +---------------------------------------------+ | !! !! | !! !! | !! !! | !! !! | !! !! | +--------------------(x)--------------------+ + <-- Marker +-------------------------------------------+ | | | (x) = (Marker on the top of pillar) | | | | | | | <-- 0.3794 --> ARP: Antenna Reference Point L1 : L1 Phase Center L2 : L2 Phase Center TCR: Top of Chokering BCR: Bottom of Chokering BPA: Bottom of Preamplifier