BAMF00CAN Site Information Form (site log) International GNSS Service See Instructions at: ftp://igs.org/pub/station/general/sitelog_instr.txt 0. Form Prepared by (full name) : Brian Schofield Date Prepared : 2018-04-12 Report Type : UPDATE If Update: Previous Site Log : bamf_20131219.log Modified/Added Sections : 2006-02-25: modified 4.2, Antenna Diagram A, 13; : added Antenna Diagram B; : 2008-07-03: added DOMES Number : 2009-02-26: modified 7.1 : added "BPA" to Antenna Diagrams A and B : 2009-07-08: added 3.3: firmware upgrade; : 2009-10-21: added 3.4: new receiver; : 2010-07-22: added 3.5: firmware upgrade; : 2012-01-16: cleaned up antenna diagram; : (removed L1, L2 phrase : centre offsets and clarified : ARP locations); : 2013-12-19: added 3.6: firmware upgrade; : 2018-04-12: added 3.7, 4.3; : updated 6.1; : added 8.1.1, 8.2.1, 8.3.1; : updated 11: contact information; : added Antenna diagram C. 1. Site Identification of the GNSS Monument Site Name : Bamfield Four Character ID : BAMF Monument Inscription : M027005 IERS DOMES Number : 40190M001 CDP Number : Monument Description : Stainless Steel Pedestal Height of the Monument : 1.2 m Monument Foundation : Stainless Steel rods and epoxy grout Foundation Depth : 1.0 m Marker Description : FORCED CENTERED STAINLESS STEEL PLATE Date Installed : 2002-05-03T22:00Z Geologic Characteristic : BEDROCK Bedrock Type : METAMORPHIC Bedrock Condition : WEATHERED Fracture Spacing : 51-200 cm Fault zones nearby : Cascadia Subduction Zone Distance/activity : on-going low level seismicity Additional Information : This station is part of the Western Canada : Deformation Array (WCDA). : ******************************************* : The GPS reference mark consists of a : stainless steel plate with a forced centered : bolt. The stainless steel plate is the top : surface of a stainless steel pedestal : fastened in bedrock using 4 stainless steel : threaded rods and epoxy grout. : The pedestal is: : 1.2 metres high : 0.152m in diameter. : The antenna is fastened to the pedestal : using a tamper resistant mechanism which : permits orientation of the antenna. : *file audited 2008-10-07* 2. Site Location Information City or Town : Bamfield State or Province : British Columbia Country : Canada Tectonic Plate : NORTH AMERICAN Approximate Position (ITRF) X coordinate (m) : -2420721.200 Y coordinate (m) : -3439856.061 Z coordinate (m) : 4778532.675 Latitude (N is +) : +485007.14 Longitude (E is +) : -1250806.32 Elevation (m,ellips.) : 11.1 Additional Information : NOTE: - these coordinates are approximate; : - coordinates should not be used to : constrain site in data processing; 3. GNSS Receiver Information 3.1 Receiver Type : LEICA CRS1000 Satellite System : GPS Serial Number : 23164 Firmware Version : 9.00 4.42 1.26 1.20 Elevation Cutoff Setting : 5 deg Date Installed : 2002-05-03T22:00Z Date Removed : 2005-08-29T19:00Z Temperature Stabiliz. : none Additional Information : 3.2 Receiver Type : TRIMBLE NETRS Satellite System : GPS Serial Number : 4448240861 Firmware Version : 1.1-2 19 Apr 2005 Elevation Cutoff Setting : 5 deg Date Installed : 2005-08-30T00:00Z Date Removed : 2009-07-08T21:25Z Temperature Stabiliz. : none Additional Information : 3.3 Receiver Type : TRIMBLE NETRS Satellite System : GPS Serial Number : 4448240861 Firmware Version : 1.2-0 26 Apr 2007 Elevation Cutoff Setting : 5 deg Date Installed : 2009-07-08T21:25Z Date Removed : 2009-10-21T21:00Z Temperature Stabiliz. : none Additional Information : 3.4 Receiver Type : TRIMBLE NETRS Satellite System : GPS Serial Number : 4635120789 Firmware Version : 1.2-0 26 Apr 2007 Elevation Cutoff Setting : 5 deg Date Installed : 2009-10-21T21:20Z Date Removed : 2010-06-24T19:01Z Temperature Stabiliz. : none Additional Information : 3.5 Receiver Type : TRIMBLE NETRS Satellite System : GPS Serial Number : 4635120789 Firmware Version : 1.3-0 05 Apr 2010 Elevation Cutoff Setting : 5 deg Date Installed : 2010-06-24T19:01Z Date Removed : 2013-11-20T23:06Z Temperature Stabiliz. : none Additional Information : 3.6 Receiver Type : TRIMBLE NETRS Satellite System : GPS Serial Number : 4635120789 Firmware Version : 1.3-2 30 Oct 2013 Elevation Cutoff Setting : 5 deg Date Installed : 2013-11-20T23:10Z Date Removed : 2018-03-20T15:53Z Temperature Stabiliz. : none Additional Information : firmware upgrade 3.7 Receiver Type : SEPT POLARX5 Satellite System : GPS+GLO+GAL Serial Number : 3015944 Firmware Version : 5.1.2 Elevation Cutoff Setting : 0 deg Date Installed : 2018-03-20T22:18Z Date Removed : CCYY-MM-DDThh:mmZ Temperature Stabiliz. : none Additional Information : new receiver 3.x Receiver Type : (A20, from rcvr_ant.tab; see instructions) Satellite System : (GPS+GLO+GAL+BDS+QZSS+SBAS) Serial Number : (A20, but note the first A5 is used in SINEX) Firmware Version : (A11) Elevation Cutoff Setting : (deg) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : (multiple lines) 4. GNSS Antenna Information 4.1 Antenna Type : LEIAT504 SCIS Serial Number : 00732 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 0.000 Marker->ARP North Ecc(m) : 0.000 Marker->ARP East Ecc(m) : 0.000 Alignment from True N : 0 deg Antenna Radome Type : SCIS Radome Serial Number : 00017 Antenna Cable Type : RG-214 Antenna Cable Length : 60 m Date Installed : 2002-05-03T22:00Z Date Removed : 2005-08-29T19:00Z Additional Information : ref. Antenna Diagram A 4.2 Antenna Type : TRM29659.00 SCIS Serial Number : 0220366143 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 0.0000 Marker->ARP North Ecc(m) : 0.0000 Marker->ARP East Ecc(m) : 0.0000 Alignment from True N : 0 deg Antenna Radome Type : SCIS Radome Serial Number : 00017 Antenna Cable Type : RG-214 Antenna Cable Length : 60 m Date Installed : 2005-08-30T00:00Z Date Removed : 2018-03-20T15:53Z Additional Information : ref. Antenna Diagram B : security ring removed; 4.3 Antenna Type : SEPCHOKE_B3E6 SPKE Serial Number : 5120 Antenna Reference Point : BAM Marker->ARP Up Ecc. (m) : 0.000 Marker->ARP North Ecc(m) : 0.000 Marker->ARP East Ecc(m) : 0.000 Alignment from True N : 0 deg Antenna Radome Type : SPKE Radome Serial Number : Antenna Cable Type : RG-214 Antenna Cable Length : 60 m Date Installed : 2018-03-20T22:18Z Date Removed : CCYY-MM-DDThh:mmZ Additional Information : New antenna. Refer to diagram C. 4.x Antenna Type : (A20, from rcvr_ant.tab; see instructions) Serial Number : (A*, but note the first A5 is used in SINEX) Antenna Reference Point : (BPA/BCR/XXX from "antenna.gra"; see instr.) Marker->ARP Up Ecc. (m) : (F8.4) Marker->ARP North Ecc(m) : (F8.4) Marker->ARP East Ecc(m) : (F8.4) Alignment from True N : (deg; + is clockwise/east) Antenna Radome Type : (A4 from rcvr_ant.tab; see instructions) Radome Serial Number : Antenna Cable Type : (vendor & type number) Antenna Cable Length : (m) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 5. Surveyed Local Ties 5.x Tied Marker Name : Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc) Tied Marker CDP Number : (A4) Tied Marker DOMES Number : (A9) Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : (m) dy (m) : (m) dz (m) : (m) Accuracy (mm) : (mm) Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc) Date Measured : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 6. Frequency Standard 6.1 Standard Type : INTERNAL CLOCK STEERING Input Frequency : Effective Dates : 2005-08-30/CCYY-MM-DD Notes : 6.x Standard Type : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc) Input Frequency : (if external) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 7. Collocation Information 7.1 Instrumentation Type : Tide Gauge (Bamfield PSMSL #822108) Status : PERMANENT Effective Dates : 1969-01-01/CCYY-MM-DD Notes : http://www.pol.ac.uk/psmsl/pubi/ : docu.psmsl/822108.docu : Station name = BAMFIELD : PSMSL country/station code = 822/108 7.x Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc) Status : (PERMANENT/MOBILE) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8. Meteorological Instrumentation 8.1.1 Humidity Sensor Model : Vaisala Barocap WXT510 Manufacturer : Vaisala Serial Number : C1430013 Data Sampling Interval : 60 sec Accuracy (% rel h) : 0.3 Aspiration : NATURAL Height Diff to Ant : -0.3 m Calibration date : (CCYY-MM-DD) Effective Dates : 2012-05-14/2018-03-20 Notes : Sensor position: X=-2420721.36, Y=-3439856.10, : Z=4778532.76, H=10.8M 8.1.x Humidity Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy (% rel h) : (% rel h) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.2.1 Pressure Sensor Model : Vaisala Barocap WXT510 Manufacturer : Vaisala Serial Number : C1430013 Data Sampling Interval : 60 sec Accuracy : 0.5 hPa Height Diff to Ant : -0.3 m Calibration date : (CCYY-MM-DD) Effective Dates : 2012-05-14/2018-03-20 Notes : Sensor position: X=-2420721.36, Y=-3439856.10, : Z=4778532.76, H=10.8M 8.2.x Pressure Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (hPa) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.3.1 Temp. Sensor Model : Vaisala Thermocap WXT510 Manufacturer : Vaisala Serial Number : C1430013 Data Sampling Interval : 60 sec Accuracy : 0.3 deg C Aspiration : NATURAL Height Diff to Ant : -0.3 m Calibration date : Effective Dates : 2012-05-14/2018-03-20 Notes : Sensor position: X=-2420721.36, Y=-3439856.10, : Z=4778532.76, H=10.8M 8.3.x Temp. Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (deg C) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.4.x Water Vapor Radiometer : Manufacturer : Serial Number : Distance to Antenna : (m) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.5.x Other Instrumentation : (multiple lines) 9. Local Ongoing Conditions Possibly Affecting Computed Position 9.1.x Radio Interferences : (TV/CELL PHONE ANTENNA/RADAR/etc) Observed Degradations : (SN RATIO/DATA GAPS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.2.x Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.3.x Signal Obstructions : (TREES/BUILDINGS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 10. Local Episodic Effects Possibly Affecting Data Quality 10.x Date : (CCYY-MM-DD/CCYY-MM-DD) Event : (TREE CLEARING/CONSTRUCTION/etc) 11. On-Site, Point of Contact Agency Information Agency : Geological Survey of Canada Preferred Abbreviation : GSC Mailing Address : P.O. Box 6000 : 9860 West Saanich Rd. : Sidney, B.C. : Canada V8L 4B2 Primary Contact Contact Name : Brian Schofield Telephone (primary) : 250-363-6701 Telephone (secondary) : 250-363-6500 Fax : 250-363-6565 E-mail : Brian.Schofield@canada.ca Secondary Contact Contact Name : Lisa Nykolaishen Telephone (primary) : 250-363-8808 Telephone (secondary) : 250-363-6500 Fax : 250-363-6565 E-mail : Lisa.Nykolaishen@canada.ca Additional Information : 12. Responsible Agency (if different from 11.) Agency : Preferred Abbreviation : Mailing Address : Primary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Secondary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Additional Information : 13. More Information Primary Data Center : PGC Secondary Data Center : NRCan/CGS URL for More Information : https://webapp.geod.nrcan.gc.ca/geod/data-donnees/ Hardcopy on File Site Map : https://webapp.geod.nrcan.gc.ca/geod/data-donnees/ Site Diagram : (Y) Horizon Mask : (Y) Monument Description : (Y) Site Pictures : (Y) Additional Information : Hardcopy Information available from : www site or site contact Antenna Graphics with Dimensions Antenna Diagram A ***************** LEIAT504 SCIS (not to scale) . . . . . . . . . . . . . . . . <-- DOME (SCIS) . . . . . . . . . . . . . . . . +-------+ . . / + \ . . | + | . . +-----------------------------------------------+ . . | | . . | | . . | | . . | | . . +-+------------------------------------------------+-+ . . +-------------------+-------------+------------------+ . | | | | | | STAINLESS STEEL | | | | | | SECURITY BOLT-> | | +------X------+ <----|-|--------- 0.000 ARP=BPA | | * * | | ============ * * ============ * * STAINLESS STEEL ============ * * ============ SECURITY RING * * * * STAINLESS * * STEEL * * PEDESTAL <-- 0.3794 --> X ... Antenna Reference Point (ARP) AND Monument Reference Point Antenna Diagram B ***************** TRM29659.00 SCIS (not to scale) . . . . . . . . . . . . . . . . <-- DOME (SCIS) . . . . . . . . . . . . . . . . ----- . . / + \ . . | + | . . +-----------------------------------------------+ . . | | . . | | . . | | . . | | . . +-+------------------------------------------------+-+ . . +-------------------+-------------+------------------+ . | | | | +------X------+ <---------------- 0.000 ARP=BPA * * * * * * * * * * * * STAINLESS * * STEEL * * PEDESTAL <---------------------- 0.381 ---------------------> X ... Antenna Reference Point (ARP) AND Monument Reference Point Antenna Diagram C ***************** SEPCHOKE_B3E6 SPKE (not to scale) . . . . . . . . . . . . . . . . . . . <-- DOME (SPKE) . . . . . . . . . . . . . . . . . . . . --------------- . <-- 0.1550 . / \ . . | | . . +-----------------------------------------------------+ . <-- 0.1080 TCR . | | . . | | . . | | . . |<-- 0.3630 -->| . . +-----------------+-----------------+-----------------+ . <-- 0.0480 BCR |<-- 0.1210 -->| | | | | +--------x--------+ <------------------- 0.0000 BPA=ARP * * * * * * * * * * STAINLESS * * STEEL * * PEDESTAL X ... Antenna Reference Point (ARP) AND Monument Reference Point