ALBH00CAN Site Information Form (site log) International GNSS Service See Instructions at: ftp://igs.org/pub/station/general/sitelog_instr.txt 0. Form Prepared by (full name) : Brian Schofield Date Prepared : 2018-04-11 Report Type : UPDATE If Update: Previous Site Log : albh_20160608.log Modified/Added Sections : 2006-02-28: - Modified 11.0, 13.0, Antenna : Diagram F; : 2008-06-24: - 3.12, 3.12: inserted elevation : cutoff setting; : - 5.1: inserted Tied Marker Usage : and Survey Method type; : - 6.5, 6.7: corrected end times; : 2008-11-05: - 7.2: inserted effective start : date of repeat abs. grav. : recordings: : 2011-01-20: - 8.1.1: updated to include : effective end date of met sensor : record; : 2012-01-16: - cleaned up antenna diagrams; : (removed L1, L2 phase centre : offsets and clarified : ARP location; : 2015-09-15: - 3.22: new receiver; : - 4.9: new antenna; : - 11: updated contact names; : - Antenna Diagram G; : 2016-06-08: - 3.23: new receiver; : - 6.22: external clock; : - 11: updated contact names; : 2018-04-11: - updated 8.1, 8.2 and 8.3; 1. Site Identification of the GNSS Monument Site Name : Albert Head Four Character ID : ALBH Monument Inscription : 927000 IERS DOMES Number : 40129M003 CDP Number : n/a Monument Description : CONCRETE PIER, 60cm DIAMETER Height of the Monument : 3 m Monument Foundation : RE-ENFORCED STEEL IN BEDROCK Foundation Depth : 0.6 m Marker Description : BRASS PLATE; FORCED CENTER STAINLESS STEEL Date Installed : 1992-05-04T00:00Z Geologic Characteristic : BEDROCK Bedrock Type : IGNEOUS/METAMORPHIC Bedrock Condition : WEATHERED Fracture Spacing : over 200 cm Fault zones nearby : Cascadia Subduction Zone Distance/activity : Additional Information : This station is part of the Western Canada : Deformation Array (WCDA)as well as the : Canadian Active Control System (CACS) : ******************************************** : The GPS reference mark consists of a brass : plate with a forced centered stainless steel : bolt. The brass plate is embedded on top of : a 3.0 metre high concrete pier, 60 cm in : diameter. The concrete pier is anchored to : exposed bedrock using steel re-enforcement : bars to a depth of 0.6 m. The antenna is : attached to the brass forced centered plate : via a 10 cm high anodized aluminum base. : This base provides a constant height : above the brass plate and also permits : the antenna to be referenced to north. : ** File Audited as of 2008-06-24 2. Site Location Information City or Town : Victoria State or Province : B.C. Country : Canada Tectonic Plate : NORTH AMERICAN Approximate Position (ITRF) X coordinate (m) : -2341332.8840 Y coordinate (m) : -3539049.5090 Z coordinate (m) : 4745791.3600 Latitude (N is +) : +482323.28 Longitude (E is +) : -1232914.64 Elevation (m,ellips.) : +32.0 Additional Information : NOTE: - these coordinates are approximate; : - coordinates should not be used to : constrain site in data processing; 3. GNSS Receiver Information 3.1 Receiver Type : ROGUE SNR-8C Satellite System : GPS Serial Number : 312 Firmware Version : Meenix Elevation Cutoff Setting : Date Installed : 1992-05-04T00:00Z Date Removed : 1992-05-07T23:50Z Temperature Stabiliz. : none Additional Information : Installed 3.2 Receiver Type : ROGUE SNR-8C Satellite System : GPS Serial Number : 312 Firmware Version : Meenix Upgrade Elevation Cutoff Setting : Date Installed : 1992-05-07T23:50Z Date Removed : 1992-12-16T20:05Z Temperature Stabiliz. : none Additional Information : 3.3 Receiver Type : ROGUE SNR-8C Satellite System : GPS Serial Number : 312 Firmware Version : Meenix 7.3 Elevation Cutoff Setting : Date Installed : 1992-12-16T20:05Z Date Removed : 1993-04-23T16:00Z Temperature Stabiliz. : none Additional Information : Firmware upgrade 3.4 Receiver Type : ROGUE SNR-8C Satellite System : GPS Serial Number : 312 Firmware Version : Meenix 7.3 AOA Upgr. Elevation Cutoff Setting : Date Installed : 1993-04-23T16:00Z Date Removed : 1993-05-11T19:13Z Temperature Stabiliz. : none Additional Information : Firmware upgrade 3.5 Receiver Type : ROGUE SNR-8C Satellite System : GPS Serial Number : 312 Firmware Version : Meenix 7.3 AOA fix Elevation Cutoff Setting : Date Installed : 1993-05-11T19:13Z Date Removed : 1993-10-25T22:00Z Temperature Stabiliz. : none Additional Information : 3.6 Receiver Type : ROGUE SNR-8100 Satellite System : GPS Serial Number : 119 Firmware Version : SFG2 0.0 lk 93/08/27 Elevation Cutoff Setting : Date Installed : 1993-10-25T22:00Z Date Removed : 1993-11-23T19:31Z Temperature Stabiliz. : none Additional Information : 3.7 Receiver Type : ROGUE SNR-8C Satellite System : GPS Serial Number : 313 Firmware Version : Meenix 7.4 Elevation Cutoff Setting : Date Installed : 1993-11-23T19:31Z Date Removed : 1994-01-16T04:19Z Temperature Stabiliz. : none Additional Information : 3.8 Receiver Type : ROGUE SNR-8000 Satellite System : GPS Serial Number : 168 Firmware Version : SFG2 0.0 lk 93/08/27 Elevation Cutoff Setting : Date Installed : 1994-01-16T04:19Z Date Removed : 1995-01-11T22:15Z Temperature Stabiliz. : none Additional Information : New Receiver Type / firmware : SFG2 Firmware developed by JPL for Seafloor : Geodetic Experiment 3.9 Receiver Type : ROGUE SNR-8000 Satellite System : GPS Serial Number : 292 Firmware Version : 3.0 lk 94/10/10 Elevation Cutoff Setting : Date Installed : 1995-01-11T22:15Z Date Removed : 1995-01-12T18:48Z Temperature Stabiliz. : none Additional Information : 3.10 Receiver Type : ROGUE SNR-8000 Satellite System : GPS Serial Number : 292 Firmware Version : 3.0.32.2 lk 94/12/09 Elevation Cutoff Setting : Date Installed : 1995-01-12T18:48Z Date Removed : 1995-06-07T20:52Z Temperature Stabiliz. : none Additional Information : 3.11 Receiver Type : ROGUE SNR-8000 Satellite System : GPS Serial Number : 292 Firmware Version : 3.0.32.3 lk 95/03/21 Elevation Cutoff Setting : Date Installed : 1995-06-07T20:52Z Date Removed : 1995-07-21T19:26Z Temperature Stabiliz. : none Additional Information : 3.12 Receiver Type : ROGUE SNR-8000 Satellite System : GPS Serial Number : 292 Firmware Version : 3.2 lk 95/03/09 Elevation Cutoff Setting : 10 deg Date Installed : 1995-07-21T19:26Z Date Removed : 1997-08-07T17:53Z Temperature Stabiliz. : none Additional Information : 3.13 Receiver Type : ROGUE SNR-8000 Satellite System : GPS Serial Number : 165 Firmware Version : 3.2 lk 95/03/09 Elevation Cutoff Setting : 10 deg Date Installed : 1997-08-07T17:53Z Date Removed : 1999-02-12T00:00Z Temperature Stabiliz. : none Additional Information : 3.14 Receiver Type : ROGUE SNR-8000 Satellite System : GPS Serial Number : 165 Firmware Version : 3.2.32.5x lk 95/02/28 Elevation Cutoff Setting : 10 deg Date Installed : 1999-02-12T00:00Z Date Removed : 1999-03-30T19:00Z Temperature Stabiliz. : Tolerance = 5 C Additional Information : 3.15 Receiver Type : ROGUE SNR-8100 Satellite System : GPS Serial Number : 128 Firmware Version : 3.2.32.5x lk 95/02/28 Elevation Cutoff Setting : 10 deg Date Installed : 1999-03-30T19:00Z Date Removed : 1999-06-26T19:10Z Temperature Stabiliz. : Tolerance = 5 C Additional Information : 3.16 Receiver Type : ROGUE SNR-8000 Satellite System : GPS Serial Number : 226 Firmware Version : 3.2.32.5x lk 95/02/28 Elevation Cutoff Setting : 10 deg Date Installed : 1999-06-26T19:10Z Date Removed : 1999-08-17T15:15Z Temperature Stabiliz. : Tolerance = 5 C Additional Information : 3.17 Receiver Type : ROGUE SNR-8000 Satellite System : GPS Serial Number : 226 Firmware Version : 3.2.32.9N lk 99/07/28 Elevation Cutoff Setting : 10 deg Date Installed : 1999-08-17T15:30Z Date Removed : 2000-03-15T17:55Z Temperature Stabiliz. : Tolerance = 5 C Additional Information : 3.18 Receiver Type : AOA BENCHMARK ACT Satellite System : GPS Serial Number : 2025 Firmware Version : 3.3.32.2N lk 99/07/28 Elevation Cutoff Setting : 10 deg Date Installed : 2000-03-15T18:18Z Date Removed : 2003-08-26T16:15Z Temperature Stabiliz. : Tolerance = 5 C Additional Information : 3.19 Receiver Type : AOA BENCHMARK ACT Satellite System : GPS Serial Number : 2042 Firmware Version : 3.3.32.2N lk 99/07/28 Elevation Cutoff Setting : 10 deg Date Installed : 2003-08-26T16:15Z Date Removed : 2004-01-27T18:17Z Temperature Stabiliz. : Tolerance = 5 C Additional Information : 3.20 Receiver Type : AOA BENCHMARK ACT Satellite System : GPS Serial Number : 2028 Firmware Version : 3.3.32.2N lk 99/07/28 Elevation Cutoff Setting : 10 deg Date Installed : 2004-01-28T18:30Z Date Removed : 2005-10-12T16:45Z Temperature Stabiliz. : Tolerance = 5 C Additional Information : 3.21 Receiver Type : AOA BENCHMARK ACT Satellite System : GPS Serial Number : 1113 Firmware Version : 3.3.32.2N lk 99/07/28 Elevation Cutoff Setting : 10 deg Date Installed : 2005-10-12T16:45Z Date Removed : 2015-09-15T15:50Z Temperature Stabiliz. : Tolerance = 5 C Additional Information : 3.22 Receiver Type : TRIMBLE NETR9 Satellite System : GPS+GLO Serial Number : 5048K72092 Firmware Version : 4.85 Elevation Cutoff Setting : 10 deg Date Installed : 2015-09-15T19:00Z Date Removed : 2016-06-08T23:59Z Temperature Stabiliz. : Tolerance = 5 C Additional Information : 3.23 Receiver Type : TPS NET-G3A Satellite System : GPS+GLO Serial Number : 618-02357 Firmware Version : 3.6 Dec,04,2012 p1 Elevation Cutoff Setting : 5 deg Date Installed : 2016-06-09T00:00Z Date Removed : CCYY-MM-DDThh:mmZ Temperature Stabiliz. : Tolerance = 5 C Additional Information : 3.x Receiver Type : (A20, from rcvr_ant.tab; see instructions) Satellite System : (GPS+GLO+GAL+BDS+QZSS+SBAS) Serial Number : (A20, but note the first A5 is used in SINEX) Firmware Version : (A11) Elevation Cutoff Setting : (deg) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : (multiple lines) 4. GNSS Antenna Information 4.1 Antenna Type : AOAD/M_B EMRA Serial Number : 91119 Antenna Reference Point : BCR Marker->ARP Up Ecc. (m) : 0.129 Marker->ARP North Ecc(m) : 0 Marker->ARP East Ecc(m) : 0 Alignment from True N : 0 deg Antenna Radome Type : EMRA Radome Serial Number : Antenna Cable Type : RG-214 Antenna Cable Length : 60 m Date Installed : 1992-05-04T00:00Z Date Removed : 1992-05-25T00:00Z Additional Information : ref. Antenna Diagram 'A' below : degrees offset from North refers to 'True : North' : The dome is installed using an aluminum : flange ring attached to the choke ring. : The flange ring extends the radius of the : ground plane by 2.5 cm. 4.2 Antenna Type : AOAD/M_B EMRA Serial Number : 91119 Antenna Reference Point : BCR Marker->ARP Up Ecc. (m) : 0.126 Marker->ARP North Ecc(m) : 0 Marker->ARP East Ecc(m) : 0 Alignment from True N : 0 deg Antenna Radome Type : EMRA Radome Serial Number : Antenna Cable Type : RG-214 Antenna Cable Length : 60 m Date Installed : 1992-05-25T00:00Z Date Removed : 1994-04-14T20:35Z Additional Information : antenna height verified 27-APR-1993 : ref. Antenna Diagram 'A' below : degrees offset from North refers to 'True : North' : The dome is installed using an aluminum : flange ring attached to the choke ring. : The flange ring extends the radius of the : ground plane by 2.5 cm. 4.3 Antenna Type : AOAD/M_T EMRA Serial Number : 92172 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 0.001 Marker->ARP North Ecc(m) : 0 Marker->ARP East Ecc(m) : 0 Alignment from True N : 0 deg Antenna Radome Type : EMRA Radome Serial Number : Antenna Cable Type : RG-214 Antenna Cable Length : 60 m Date Installed : 1994-04-14T20:35Z Date Removed : 1995-01-11T22:15Z Additional Information : ref. Antenna Diagram 'B' below : degrees offset from North refers to 'True : North' : The dome is installed using an aluminum : flange ring attached to the choke ring. : The flange ring extends the radius of the : ground plane by 2.5 cm. : Antenna p/n 7490400-1 4.4 Antenna Type : AOAD/M_T EMRA Serial Number : 94368 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 0.100 Marker->ARP North Ecc(m) : 0 Marker->ARP East Ecc(m) : 0 Alignment from True N : 0 deg Antenna Radome Type : EMRA Radome Serial Number : Antenna Cable Type : RG-214 Antenna Cable Length : 60 m Date Installed : 1995-01-11T22:15Z Date Removed : 1995-06-07T20:52Z Additional Information : ref. Antenna Diagram 'C' below : degrees offset from North refers to 'True : North' : The dome is installed using an aluminum : flange ring attached to the choke ring. : The flange ring extends the radius of the : ground plane by 2.5 cm. : Antenna p/n 7490400-4 4.5 Antenna Type : AOAD/M_T EMRA Serial Number : 95174 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 0.100 Marker->ARP North Ecc(m) : 0 Marker->ARP East Ecc(m) : 0 Alignment from True N : 0 deg Antenna Radome Type : EMRA Radome Serial Number : Antenna Cable Type : RG-214 Antenna Cable Length : 60 m Date Installed : 1995-06-07T20:52Z Date Removed : 2003-09-03T18:35Z Additional Information : RF skirt installed 21-JUL-1995 19:26 UT : around base of antenna s.t. top of pier : covered : ref. Antenna Diagram 'D' below : degrees offset from North refers to 'True : North' : The dome is installed using an aluminum : flange ring attached to the choke ring. : The flange ring extends the radius of the : ground plane by 2.5 cm. : Antenna p/n 7490582-1 4.6 Antenna Type : AOAD/M_T EMRA Serial Number : 95174 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 0.100 Marker->ARP North Ecc(m) : 0 Marker->ARP East Ecc(m) : 0 Alignment from True N : 0 deg Antenna Radome Type : EMRA Radome Serial Number : Antenna Cable Type : Andrews FSJ-2-50 VSWR-WC TEST Antenna Cable Length : 55 m Date Installed : 2003-09-03T18:35Z Date Removed : 2003-09-05T16:52Z Additional Information : Antenna p/n 7490582-1 : New Cable : ref. Antenna Diagram 'D' below 4.7 Antenna Type : AOAD/M_T SCIS Serial Number : 99442 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 0.100 Marker->ARP North Ecc(m) : 0 Marker->ARP East Ecc(m) : 0 Alignment from True N : 0 deg Antenna Radome Type : SCIS Radome Serial Number : Antenna Cable Type : Andrews FSJ-2-50 VSWR-WC TEST Antenna Cable Length : 55 m Date Installed : 2003-09-05T16:52Z Date Removed : 2003-09-08T19:17Z Additional Information : Antenna p/n 7490582-2 : RF Screen removed : ref. Antenna Diagram 'E' below 4.8 Antenna Type : AOAD/M_T SCIS Serial Number : 99442 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 0.100 Marker->ARP North Ecc(m) : 0 Marker->ARP East Ecc(m) : 0 Alignment from True N : 0 deg Antenna Radome Type : SCIS Radome Serial Number : Antenna Cable Type : Andrews FSJ-2-50 VSWR-WC TEST Antenna Cable Length : 55 m Date Installed : 2003-09-08T19:17Z Date Removed : 2015-09-15T15:50Z Additional Information : Antenna p/n 7490582-2 : SS RF Screen added : ref. Antenna Diagram 'F' below 4.9 Antenna Type : TRM59800.00 SCIS Serial Number : 5112354071 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 0.100 Marker->ARP North Ecc(m) : 0.000 Marker->ARP East Ecc(m) : 0.000 Alignment from True N : 0 deg Antenna Radome Type : SCIS Radome Serial Number : Antenna Cable Type : Andrews FSJ-2-50 VSWR-WC TEST Antenna Cable Length : 55 m Date Installed : 2015-09-15T19:00Z Date Removed : CCYY-MM-DDThh:mmZ Additional Information : ref. Antenna Diagram 'G' below 4.x Antenna Type : (A20, from rcvr_ant.tab; see instructions) Serial Number : (A*, but note the first A5 is used in SINEX) Antenna Reference Point : (BPA/BCR/XXX from "antenna.gra"; see instr.) Marker->ARP Up Ecc. (m) : (F8.4) Marker->ARP North Ecc(m) : (F8.4) Marker->ARP East Ecc(m) : (F8.4) Alignment from True N : (deg; + is clockwise/east) Antenna Radome Type : (A4 from rcvr_ant.tab; see instructions) Radome Serial Number : Antenna Cable Type : (vendor & type number) Antenna Cable Length : (m) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 5. Surveyed Local Ties 5.1 Tied Marker Name : Victoria LBI Tied Marker Usage : VLBI Tied Marker CDP Number : 7289 Tied Marker DOMES Number : 40129M001 Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : 22.740 dy (m) : -34.377 dz (m) : -23.036 Accuracy (mm) : provisional mm Survey method : TOTAL STATION Date Measured : 1992-02-26T00:00Z Additional Information : Contact GSC for most current information 5.x Tied Marker Name : Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc) Tied Marker CDP Number : (A4) Tied Marker DOMES Number : (A9) Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : (m) dy (m) : (m) dz (m) : (m) Accuracy (mm) : (mm) Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc) Date Measured : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 6. Frequency Standard 6.1 Standard Type : EXTERNAL CESIUM Input Frequency : 5 MHz Effective Dates : 1992-05-04/1993-06-11 Notes : 6.2 Standard Type : EXTERNAL RUBIDIUM Input Frequency : 5 MHz Effective Dates : 1993-06-11/1993-11-18 Notes : 6.3 Standard Type : EXTERNAL CESIUM Input Frequency : 5 MHz Effective Dates : 1993-11-18/1994-01-11 Notes : 6.4 Standard Type : EXTERNAL RUBIDIUM Input Frequency : 5 MHz Effective Dates : 1994-01-11/1994-01-13 Notes : 6.5 Standard Type : EXTERNAL CESIUM Input Frequency : 5 MHz Effective Dates : 1994-01-13/1995-01-11 Notes : 6.6 Standard Type : INTERNAL Input Frequency : Effective Dates : 1995-01-11/1995-01-12 Notes : TURBOROGUE clock steering 6.7 Standard Type : EXTERNAL RUBIDIUM Input Frequency : 5 MHz Effective Dates : 1995-01-12/1995-01-23 Notes : 6.8 Standard Type : EXTERNAL CESIUM Input Frequency : 5 MHz Effective Dates : 1995-01-23/1995-12-12 Notes : 6.9 Standard Type : EXTERNAL RUBIDIUM Input Frequency : 5 MHz Effective Dates : 1995-12-12/1996-02-16 Notes : 6.10 Standard Type : EXTERNAL CESIUM Input Frequency : 5 MHz Effective Dates : 1996-02-16/1996-12-17 Notes : 6.11 Standard Type : EXTERNAL RUBIDIUM Input Frequency : 5 MHz Effective Dates : 1996-12-17/1997-08-07 Notes : 6.12 Standard Type : EXTERNAL RUBIDIUM Input Frequency : 5 MHz Effective Dates : 1997-08-07/1998-01-27 Notes : 6.13 Standard Type : EXTERNAL CESIUM Input Frequency : 5 MHz Effective Dates : 1998-01-27/1999-09-29 Notes : 6.14 Standard Type : INTERNAL Input Frequency : Effective Dates : 1999-09-29/1999-12-13 Notes : 6.15 Standard Type : EXTERNAL RUBIDIUM Input Frequency : 5 MHz Effective Dates : 1999-12-13/2000-10-06 Notes : 6.16 Standard Type : EXTERNAL HYDROGEN MASER Input Frequency : 5 MHz Effective Dates : 2000-10-06/2003-08-28 Notes : 6.17 Standard Type : INTERNAL Input Frequency : Effective Dates : 2003-08-28/2003-09-10 Notes : 6.18 Standard Type : EXTERNAL HYDROGEN MASER Input Frequency : 5 MHz Effective Dates : 2003-09-10/2003-10-28 Notes : 6.19 Standard Type : INTERNAL Input Frequency : Effective Dates : 2003-10-28/2004-03-24 Notes : 6.20 Standard Type : EXTERNAL HYDROGEN MASER Input Frequency : 5 MHz Effective Dates : 2004-03-24/2006-01-18 Notes : Maser failure commenced 2006-01-17 6.21 Standard Type : INTERNAL Input Frequency : Effective Dates : 2006-01-18/2016-06-08 Notes : 6.22 Standard Type : EXTERNAL H-MASER Input Frequency : 5 MHz Effective Dates : 2016-06-09/CCYY-MM-DD Notes : 6.x Standard Type : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc) Input Frequency : (if external) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 7. Collocation Information 7.1 Instrumentation Type : VLBI Status : MOBILE Effective Dates : 1990-08-04/CCYY-MM-DD Notes : Contact GSC for more information : Mobile VLBI - CDP No. : DOMES No. : Geodetic Mark 7.2 Instrumentation Type : Absolute Gravity Site Status : MOBILE Effective Dates : 1995-07-24/CCYY-MM-DD Notes : Contact GSC for more information 7.x Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc) Status : (PERMANENT/MOBILE) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8. Meteorological Instrumentation 8.1.1 Humidity Sensor Model : HMP-35A Manufacturer : VAISALA Serial Number : Data Sampling Interval : 900 sec Accuracy (% rel h) : 3 Aspiration : Height Diff to Ant : 2 m Calibration date : (CCYY-MM-DD) Effective Dates : 1998-01-01/2010-10-26 Notes : Sensor elevated 2 metres above ground level. : Sensor removed. 8.1.x Humidity Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy (% rel h) : (% rel h) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.2.1 Pressure Sensor Model : PTB-100A Manufacturer : VAISALA Serial Number : Data Sampling Interval : 900 sec Accuracy : 0.1 hPa Height Diff to Ant : 0.0 m / To be determined m Calibration date : (CCYY-MM-DD) Effective Dates : 1998-01-01/2010-10-26 Notes : Sensor readings compensated for temperature, : non-linearity, calibration and height : difference to GPS antenna. : Sensor removed 8.2.x Pressure Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (hPa) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.3.1 Temp. Sensor Model : YSI 44212 Manufacturer : YSI Serial Number : Data Sampling Interval : 300 sec Accuracy : 0.20 deg C Aspiration : Height Diff to Ant : 2 m Calibration date : Effective Dates : 1998-01-01/2010-10-26 Notes : Sensor removed. 8.3.x Temp. Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (deg C) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.4.x Water Vapor Radiometer : Manufacturer : Serial Number : Distance to Antenna : (m) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.5.x Other Instrumentation : (multiple lines) 9. Local Ongoing Conditions Possibly Affecting Computed Position 9.1.x Radio Interferences : (TV/CELL PHONE ANTENNA/RADAR/etc) Observed Degradations : (SN RATIO/DATA GAPS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.2.x Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.3.x Signal Obstructions : (TREES/BUILDINGS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 10. Local Episodic Effects Possibly Affecting Data Quality 10.x Date : (CCYY-MM-DD/CCYY-MM-DD) Event : (TREE CLEARING/CONSTRUCTION/etc) 11. On-Site, Point of Contact Agency Information Agency : Geological Survey of Canada Preferred Abbreviation : GSC Mailing Address : P.O. Box 6000 : 9860 West Saanich Rd. : Sidney, B.C. : Canada V8L 4B2 Primary Contact Contact Name : Brian Schofield Telephone (primary) : 250-363-6701 Telephone (secondary) : 250-363-6500 Fax : 250-363-6565 E-mail : Brian.Schofield@canada.ca Secondary Contact Contact Name : Mark Caissy Telephone (primary) : 613-995-4024 Telephone (secondary) : Fax : 613-995-3215 E-mail : Mark.Caissy@canada.ca Additional Information : 12. Responsible Agency (if different from 11.) Agency : Preferred Abbreviation : Mailing Address : Primary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Secondary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Additional Information : 13. More Information Primary Data Center : PGC Secondary Data Center : NRCan/CGS URL for More Information : Hardcopy on File Site Map : Site Diagram : (Y) Horizon Mask : (Y) Monument Description : (Y) Site Pictures : (Y) Additional Information : Hardcopy Information available from : www site or site contact Antenna Graphics with Dimensions Antenna Diagram A ***************** ROGUE: AOAD/M_B (Allen Osborne Design) (Not to Scale) . . . . . . . .<-- ACRYLIC DOME . ----- . (EMRA) . / + \ . . | + | . . +-----------------------------------------------+ . . | | . . | | . . | | . . | | . . | | . .. +-------------------+-------X-----+------------------+ <- 0.000 BCR=ARP |======FLANGE======= | | =======RING=======| | +-------------+ | <-- -0.011 | | | | | |=> antenna mount (4 legs) | | [-----------------------------#-----------------------------] <- TOP OF [ ] CONCRETE [ ] PIER [ ] [ ] # ... Monument Reference Point X ... Antenna Reference Point (ARP) Antenna Diagram B ***************** TURBOROGUE: AOAD/M_T (Allen Osborne Design) (Not to Scale) . . . . . . . .<- ACRYLIC DOME . ----- . (EMRA) . / + \ . . | + | . . +-----------------------------------------------+ . . | | . . | | . . | | . . | | . . +-+------------------------------------------------+-+ . .. +-------------------+-------------+------------------+ .. |======FLANGE======= | | =======RING=======| | | +------X------+ <-- 0.000 BPA=ARP [-----------------------------#-----------------------------] <- TOP OF [ ] CONCRETE [ ] PIER [ ] [ ] # ... Monument Reference Point X ... Antenna Reference Point (ARP) Antenna Diagram C ***************** TURBOROGUE: AOAD/M_T (Allen Osborne Design) (not to scale) . . . . . . . .<- ACRYLIC DOME . ----- . (EMRA) . / + \ . . | + | . . +-----------------------------------------------+ . . | | . . | | . . | | . . | | . . +-+------------------------------------------------+-+ . .. +-------------------+-------------+------------------+ .. |======FLANGE======= | | =======RING=======| | | +------X------+ <------ <-- 0.000 BPA=ARP * * | * * | * * | * * 0.100m * * | * * | [-----------------------------#-----------------------------] <- TOP OF [ ] CONCRETE [ ] PIER [ ] [ ] # ... Monument Reference Point X ... Antenna Reference Point (ARP) Antenna Diagram D ***************** TURBOROGUE: AOAD/M_T (Allen Osborne Design) (not to scale) . . . . . . . .<- ACRYLIC DOME . ----- . (EMRA) . / + \ . . | + | . . +-----------------------------------------------+ . . | | . . | | . . | | . . | | . . +-+------------------------------------------------+-+ . .. +-------------------+-------------+------------------+ .. |======FLANGE======= | | =======RING=======| | | | | | +------X------+ <------ 0.000 BPA=ARP | | * * | | | * * | | | * * | |< metal | * * 0.100m | screen | * * | |RF skirt | * * | | [---------------------------------#--------------------------------]<-TOP OF [ ]CONCRETE [ ] PIER [ ] [ ] # ... Monument Reference Point X ... Antenna Reference Point (ARP) Antenna Diagram E ***************** TURBOROGUE: AOAD/M_T (Allen Osborne Design) (not to scale) . . . . . . . . . . . . . . . . <-- DOME (SCIS) . . . . . . . . . . . . ----- . . . . / + \ . . | + | . . +-----------------------------------------------+ . . | | . . | | . . | | . . | | . . +-+------------------------------------------------+-+ . . +-------------------+-------------+------------------+ . | | | | +------X------+ <----- 0.000 BPA=ARP * * | * * | * * | * * 0.100m * * | * * | [---------------------*------#------*--------------------]<-TOP OF [ ]CONCRETE [ ] PIER [ ] [ ] # ... Monument Reference Point X ... Antenna Reference Point (ARP) Antenna Diagram F ***************** AOAD/M_T SCIS (not to scale) . . . . . . . . . . . . . . . . <-- DOME (SCIS) . . . . . . . . . . . . ----- . . / + \ . . | + | . . +-----------------------------------------------+ . . | | . . | | . . | | . . | | . . +-+------------------------------------------------+-+ . . +-------------------+-------------+------------------+ . | | | | | | | | | +------X------+ <--------------- |<- 0.000 BPA=ARP | * * | | | * * | | | * * | |< metal | * * 0.100 | screen | * * | |RF skirt | * * | | [---------------------*------#------*--------------------]<-TOP OF [ ]CONCRETE [ ] PIER [ ] [ ] # ... Monument Reference Point X ... Antenna Reference Point (ARP) Antenna Diagram G ***************** TRM59800.00 SCIS (not to scale) . . . . . . . . . . . . . . . . <-- DOME (SCIS) . . . . . . . . . . . . +-------+ . . / + \ . . | + | . . +-----------------------------------------------+ . . | | . . | | . . | | . . | | . . +-+------------------------------------------------+-+ . . +-------------------+-------------+------------------+ . | | | | | | | | | +------X------+ <------ 0.000 BPA=ARP | * * | | | * * | |< metal screen | * * | | (RF Skirt) | * * 0.100m | | * * | | | * * | | [--------------------*------#------*-------------------] TOP OF [ ] CONCRETE [ ] PIER [ ] [ ] # ... Monument Reference Point X ... Antenna Reference Point (ARP)