USUD00JPN Site Information Form (site log) International GNSS Service See Instructions at: https://files.igs.org/pub/station/general/sitelog_instr_v2.0.txt 0. Form Prepared by (full name) : Tatevik Shakhbandaryan Date Prepared : 2023-03-10 Report Type : UPDATE If Update: Previous Site Log : usud_20210505.log Modified/Added Sections : 3.16,3.17 1. Site Identification of the GNSS Monument Site Name : Usuda Deep Space Tracking Station Nine Character ID : USUD00JPN Monument Inscription : IERS DOMES Number : 21729S007 CDP Number : Monument Description : VIRTUAL Height of the Monument : 0.15 m Monument Foundation : CONCRETE PAD ON ROOF Foundation Depth : Marker Description : Date Installed : 1992-10-29T00:00Z Geologic Characteristic : Bedrock Type : Bedrock Condition : Fracture Spacing : Fault zones nearby : Distance/activity : Additional Information : (multiple lines) : No Monument. GPS Antenna mounted on control : room roof, 100 meters north of the 70-meter : diameter Usuda Deep Space Antenna. 2. Site Location Information City or Town : Usuda State or Province : Country or Region : JPN Tectonic Plate : PACIFIC Approximate Position (ITRF) X coordinate (m) : -3855263.0361 Y coordinate (m) : 3427432.5571 Z coordinate (m) : 3741020.2929 Latitude (N is +) : +360759.20 Longitude (E is +) : +1382143.36 Elevation (m,ellips.) : 1508.6 Additional Information : 3. GNSS Receiver Information 3.1 Receiver Type : ROGUE SNR-8 Satellite System : GPS Serial Number : 104 Firmware Version : 4.2 Elevation Cutoff Setting : 4 deg Date Installed : 1990-07-16T00:00Z Date Removed : 1991-01-28T00:00Z Temperature Stabiliz. : none Additional Information : 3.2 Receiver Type : ROGUE SNR-8 Satellite System : GPS Serial Number : 104 Firmware Version : 5.6 Elevation Cutoff Setting : 4 deg Date Installed : 1991-01-28T00:00Z Date Removed : 1992-05-20T00:00Z Temperature Stabiliz. : none Additional Information : 3.3 Receiver Type : ROGUE SNR-8 Satellite System : GPS Serial Number : 104 Firmware Version : 7.0 Elevation Cutoff Setting : 4 deg Date Installed : 1992-05-20T00:00Z Date Removed : 1993-01-28T00:00Z Temperature Stabiliz. : none Additional Information : 3.4 Receiver Type : ROGUE SNR-8 Satellite System : GPS Serial Number : 104 Firmware Version : 7.3 Elevation Cutoff Setting : 4 deg Date Installed : 1993-01-28T00:00Z Date Removed : 1993-05-30T00:00Z Temperature Stabiliz. : none Additional Information : 3.5 Receiver Type : ROGUE SNR-8 Satellite System : GPS Serial Number : 104 Firmware Version : 7.4 Elevation Cutoff Setting : 4 deg Date Installed : 1993-05-30T00:00Z Date Removed : 1993-07-20T00:00Z Temperature Stabiliz. : none Additional Information : 3.6 Receiver Type : ROGUE SNR-8000 Satellite System : GPS Serial Number : T121 Firmware Version : 2.8-06/08/93 Elevation Cutoff Setting : 4 deg Date Installed : 1993-07-20T00:00Z Date Removed : 1995-08-10T00:00Z Temperature Stabiliz. : none Additional Information : 3.7 Receiver Type : ROGUE SNR-8000 Satellite System : GPS Serial Number : T121 Firmware Version : 3.2 link 03/09/95 Elevation Cutoff Setting : 4 deg Date Installed : 1995-08-10T00:00Z Date Removed : 1999-07-07T00:00Z Temperature Stabiliz. : none Additional Information : 3.8 Receiver Type : ROGUE SNR-8000 Satellite System : GPS Serial Number : T121 Firmware Version : 3.2.32.8 Elevation Cutoff Setting : 4 deg Date Installed : 1999-07-07T00:00Z Date Removed : 2000-10-05T00:00Z Temperature Stabiliz. : none Additional Information : Firmware upgrade. 3.9 Receiver Type : ASHTECH Z-XII3 Satellite System : GPS Serial Number : LP020002603 Firmware Version : CD00 1s soc2rnx Elevation Cutoff Setting : 4 deg Date Installed : 2000-10-05T00:00Z Date Removed : 2005-04-16T23:59Z Temperature Stabiliz. : none Additional Information : 3.10 Receiver Type : ASHTECH Z-XII3 Satellite System : GPS Serial Number : LP020004507 Firmware Version : CD00-1D02 Elevation Cutoff Setting : 4 deg Date Installed : 2005-06-16T00:00Z Date Removed : 2008-12-16T10:59Z Temperature Stabiliz. : none Additional Information : 3.11 Receiver Type : ASHTECH UZ-12 Satellite System : GPS Serial Number : ZR20012302 Firmware Version : CQ00 Elevation Cutoff Setting : 4 deg Date Installed : 2008-12-17T00:00Z Date Removed : 2019-02-15T00:00Z Temperature Stabiliz. : none Additional Information : 3.12 Receiver Type : SEPT POLARX5 Satellite System : GPS+GLO+GAL+BDS+QZSS Serial Number : 3025546 Firmware Version : 5.2.0 Elevation Cutoff Setting : 0 deg Date Installed : 2019-02-15T00:00Z Date Removed : 2019-06-10T23:28Z Temperature Stabiliz. : none Additional Information : 3.13 Receiver Type : SEPT POLARX5 Satellite System : GPS+GLO+GAL+BDS+QZSS Serial Number : 3025546 Firmware Version : 0.0.0-181002 Elevation Cutoff Setting : 0 deg Date Installed : 2019-06-10T23:28Z Date Removed : 2019-12-14T00:10Z Temperature Stabiliz. : none Additional Information : 3.14 Receiver Type : SEPT POLARX5 Satellite System : GPS+GLO+GAL+BDS+QZSS Serial Number : 3025546 Firmware Version : 5.3.0 Elevation Cutoff Setting : 0 deg Date Installed : 2019-12-14T00:10Z Date Removed : 2020-01-31T21:56Z Temperature Stabiliz. : none Additional Information : 3.15 Receiver Type : SEPT POLARX5 Satellite System : GPS+GLO+GAL+BDS+QZSS Serial Number : 3025546 Firmware Version : 5.3.2 Elevation Cutoff Setting : 0 deg Date Installed : 2020-01-31T21:56Z Date Removed : 2021-01-28T01:31Z Temperature Stabiliz. : none Additional Information : 3.16 Receiver Type : SEPT POLARX5 Satellite System : GPS+GLO+GAL+BDS+QZSS Serial Number : 3025546 Firmware Version : 5.4.0 Elevation Cutoff Setting : 0 deg Date Installed : 2021-01-28T01:31Z Date Removed : 2023-03-10T19:48Z Temperature Stabiliz. : none Additional Information : 3.17 Receiver Type : SEPT POLARX5 Satellite System : GPS+GLO+GAL+BDS+QZSS Serial Number : 3025546 Firmware Version : 5.5.0 Elevation Cutoff Setting : 0 deg Date Installed : 2023-03-10T19:48Z Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : none Additional Information : 3.x Receiver Type : (A20, from rcvr_ant.tab; see instructions) Satellite System : (GPS+GLO+GAL+BDS+QZSS+SBAS) Serial Number : (A20, but note the first A5 is used in SINEX) Firmware Version : (A11) Elevation Cutoff Setting : (deg) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : (multiple lines) 4. GNSS Antenna Information 4.1 Antenna Type : JPLD/M_R JPLA Serial Number : 104 Antenna Reference Point : BCR Marker->ARP Up Ecc. (m) : 0.0000 Marker->ARP North Ecc(m) : 0.0000 Marker->ARP East Ecc(m) : 0.0000 Alignment from True N : 0 deg Antenna Radome Type : JPLA Radome Serial Number : none Antenna Cable Type : Antenna Cable Length : Date Installed : 1990-07-16T00:00Z Date Removed : 1993-07-20T00:00Z Additional Information : 4.2 Antenna Type : AOAD/M_T JPLA Serial Number : 121 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : -0.0350 Marker->ARP North Ecc(m) : 0.0000 Marker->ARP East Ecc(m) : 0.0000 Alignment from True N : 0 deg Antenna Radome Type : JPLA Radome Serial Number : none Antenna Cable Type : Antenna Cable Length : Date Installed : 1993-07-20T00:00Z Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : ARP = Bottom of Preamp : BCR mounted flush to mounting : surface for both antenna types. : Antenna change to TR-type resulted in neg : antenna height, BCR mounted flush to mounting : surface for both antenna types. 4.x Antenna Type : (A20, from rcvr_ant.tab; see instructions) Serial Number : (A*, but note the first A5 is used in SINEX) Antenna Reference Point : (BPA/BCR/XXX from "antenna.gra"; see instr.) Marker->ARP Up Ecc. (m) : (F8.4) Marker->ARP North Ecc(m) : (F8.4) Marker->ARP East Ecc(m) : (F8.4) Alignment from True N : (deg; + is clockwise/east) Antenna Radome Type : (A4 from rcvr_ant.tab; see instructions) Radome Serial Number : Antenna Cable Type : (vendor & type number) Antenna Cable Length : (m) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 5. Surveyed Local Ties 5.1 Tied Marker Name : From 21729S003 USUD Tied Marker Usage : Tied Marker CDP Number : 7246 Tied Marker DOMES Number : 21729S001 Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : 92.915 dy (m) : 4.530 dz (m) : 48.603 Accuracy (mm) : Survey method : Date Measured : 1991-10-02T00:00Z Additional Information : 5.2 Tied Marker Name : From 21729S005 USUD Tied Marker Usage : Tied Marker CDP Number : 7246 Tied Marker DOMES Number : 21729S001 Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : dy (m) : dz (m) : Accuracy (mm) : Survey method : Date Measured : (CCYY-MM-DDThh:mmZ) Additional Information : Not recoverable 5.3 Tied Marker Name : From 21729S007 USUD Tied Marker Usage : Tied Marker CDP Number : 7246 Tied Marker DOMES Number : 21729S001 Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : dy (m) : dz (m) : Accuracy (mm) : Survey method : Date Measured : (CCYY-MM-DDThh:mmZ) Additional Information : To be done 5.x Tied Marker Name : Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc) Tied Marker CDP Number : (A4) Tied Marker DOMES Number : (A9) Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : (m) dy (m) : (m) dz (m) : (m) Accuracy (mm) : (mm) Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc) Date Measured : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 6. Frequency Standard 6.1 Standard Type : EXTERNAL H-MASER Input Frequency : 5.0 MHz Effective Dates : 2000-10-05/2006-01-26 Notes : Actual end time 08:00 UTC. 6.2 Standard Type : EXTERNAL H-MASER Input Frequency : 5.0 MHz Effective Dates : 2006-01-26/2006-02-02 Notes : Actual start time 08:00 UTC : Actual end time 17:06 UTC : During this maintenance period the H-Maser : operation was erratic. 6.3 Standard Type : EXTERNAL H-MASER Input Frequency : 5.0 MHz Effective Dates : 2006-02-02/2008-12-16 Notes : Actual start time 17:06 UTC. 6.4 Standard Type : INTERNAL Input Frequency : Effective Dates : 2008-12-17/2009-03-04 Notes : End Time 21:03 UTC 6.5 Standard Type : EXTERNAL H-MASER Input Frequency : 5.0 MHz Effective Dates : 2009-03-04/2019-02-15 Notes : Actual start time 21:04 UTC. 6.6 Standard Type : EXTERNAL H-MASER Input Frequency : 10.0 MHz Effective Dates : 2019-02-15/CCYY-MM-DD Notes : Actual start time 00:30 UTC. 6.7 Standard Type : EXTERNAL CESIUM Input Frequency : 5.0 MHz Effective Dates : CCYY-MM-DD/CCYY-MM-DD Notes : 6.x Standard Type : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc) Input Frequency : (if external) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 7. Collocation Information 7.x Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc) Status : (PERMANENT/MOBILE) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8. Meteorological Instrumentation 8.1.x Humidity Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy (% rel h) : (% rel h) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.2.x Pressure Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (hPa) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.3.x Temp. Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (deg C) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.4.x Water Vapor Radiometer : Manufacturer : Serial Number : Distance to Antenna : (m) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.5.x Other Instrumentation : (multiple lines) 9. Local Ongoing Conditions Possibly Affecting Computed Position 9.1.x Radio Interferences : (TV/CELL PHONE ANTENNA/RADAR/etc) Observed Degradations : (SN RATIO/DATA GAPS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.2.x Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.3.x Signal Obstructions : (TREES/BUILDINGS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 10. Local Episodic Effects Possibly Affecting Data Quality 10.1 Date : 2011-09-01/2011-09-01 Event : Transitioned from .soc to .ash data types. For : soc data typed used soc2rnx to do the : conversion to RINEX data. For ash data types : using teqc directly to do the conversion to : RINEX. 10.x Date : (CCYY-MM-DD/CCYY-MM-DD) Event : (TREE CLEARING/CONSTRUCTION/etc) 11. On-Site, Point of Contact Agency Information Agency : Usuda Deep Space Tracking Center Preferred Abbreviation : UDSC Mailing Address : Omagari 1831-6 : Kami-Odagiri : Saku-city, Nagano-Pref., : 384-0306 JAPAN Primary Contact Contact Name : Mitsuo Yamada Telephone (primary) : 0267-81-1230 Telephone (secondary) : Fax : 0267-81-1234 E-mail : mitsuo@isas.jaxa.jp Secondary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Additional Information : 12. Responsible Agency (if different from 11.) Agency : Jet Propulsion Laboratory Preferred Abbreviation : JPL Mailing Address : 4800 Oak Grove Drive : Pasadena, CA : USA 91109 Primary Contact Contact Name : David A. Stowers Telephone (primary) : 818-354-7055 Telephone (secondary) : Fax : 818-393-4965 E-mail : dstowers@jpl.nasa.gov Secondary Contact Contact Name : UNAVCO Network Engineer Telephone (primary) : 303-381-7500 Telephone (secondary) : Fax : 303-381-7451 E-mail : ggn-ops@postal.unavco.org Additional Information : 13. More Information Primary Data Center : JPL Secondary Data Center : CDDIS URL for More Information : Hardcopy on File Site Map : Site Diagram : 2/94 Horizon Mask : 2/94 Monument Description : 2/94 Site Pictures : 2/94 Additional Information : Antenna Graphics with Dimensions TURBOROGUE: DORNE MARGOLIN T ----- / + \ <-- 0.128 L2 | + | <-- 0.110 L1 +--------------------------------------------------+ <-- 0.102 TCR | | | | | | | | +-+--------------------------------------------------+-+ <-- 0.038 +-------------------+-------------+--------------------+ <-- 0.035 BCR | | =| | +------x------+ <-- 0.000 BPA=ARP <-- 0.381 --> ARP: Antenna Reference Point BPA: Bottom of Preamplifier L1 : L1 Phase Center L2 : L2 Phase Center TCR: Top of Chokering BCR: Bottom of Chokering