PARK00AUS Site Information Form (site log) International GNSS Service See Instructions at: https://files.igs.org/pub/station/general/sitelog_instr.txt 0. Form Prepared by (full name) : Eric_Hay Date Prepared : 2022-10-31 Report Type : UPDATE If Update: Previous Site Log : (ssss_ccyymmdd.log) Modified/Added Sections : (n.n,n.n,...) 1. Site Identification of the GNSS Monument Site Name : Australian Telescope National Facility Four Character ID : PARK Monument Inscription : IERS DOMES Number : 50108M001 CDP Number : NONE Monument Description : PILLAR Height of the Monument : 2.0 m Monument Foundation : CONCRETE Foundation Depth : 3.0 m Marker Description : Plate with SPIGOT Date Installed : 2005-07-17T00:00Z Geologic Characteristic : BEDROCK Bedrock Type : SEDIMENTRY Bedrock Condition : WEATHERED Fracture Spacing : Fault zones nearby : Distance/activity : Additional Information : 2. Site Location Information City or Town : Parkes State or Province : New South Wales Country : Australia Tectonic Plate : AUSTRALIAN Approximate Position (ITRF) X coordinate (m) : -4554255.2298 Y coordinate (m) : 2816652.4564 Z coordinate (m) : -3454059.7149 Latitude (N is +) : -325955.54 Longitude (E is +) : +1481552.61 Elevation (m,ellips.) : 397.4 Additional Information : GDA 2020 Coordinates from Regulation 13 : Certificate 3. GNSS Receiver Information 3.1 Receiver Type : JPS E_GGD Satellite System : GPS+GLO Serial Number : 8PW3GYRPYWW Firmware Version : 2.5 Elevation Cutoff Setting : 0 deg Date Installed : 2005-07-18T00:00Z Date Removed : 2009-10-11T23:59Z Temperature Stabiliz. : none Additional Information : change the installed date from 2006-07-18 to : 2005-07-18 because of type error, confirmed with : Bob Twilley 3.2 Receiver Type : JPS E_GGD Satellite System : GPS+GLO Serial Number : 8PW3GYRPYWW Firmware Version : 2.7.0 Elevation Cutoff Setting : 0 deg Date Installed : 2009-10-12T00:00Z Date Removed : 2016-05-09T00:00Z Temperature Stabiliz. : none Additional Information : 3.3 Receiver Type : TRIMBLE NETR9 Satellite System : GPS+GLO+GAL+BDS+QZSS Serial Number : 5038K70470 Firmware Version : 5.10 Elevation Cutoff Setting : 0 deg Date Installed : 2016-05-09T00:00Z Date Removed : 2016-12-16T00:00Z Temperature Stabiliz. : none Additional Information : 3.4 Receiver Type : TRIMBLE NETR9 Satellite System : GPS+GLO+GAL+BDS+QZSS Serial Number : 5038K70470 Firmware Version : 5.15 Elevation Cutoff Setting : 0 deg Date Installed : 2016-12-16T00:00Z Date Removed : 2017-05-01T00:00Z Temperature Stabiliz. : none Additional Information : Firmware upgrade only 3.5 Receiver Type : TRIMBLE NETR9 Satellite System : GPS+GLO+GAL+BDS+QZSS Serial Number : 5038K70470 Firmware Version : 5.22 Elevation Cutoff Setting : 0 deg Date Installed : 2017-05-01T00:00Z Date Removed : 2019-05-06T00:25Z Temperature Stabiliz. : none Additional Information : Firmware upgrade only 3.6 Receiver Type : TRIMBLE NETR9 Satellite System : GPS+GLO+GAL+BDS+QZSS Serial Number : 5038K70470 Firmware Version : 5.37 Elevation Cutoff Setting : 0 deg Date Installed : 2019-05-06T00:25Z Date Removed : 2020-03-16T02:04Z Temperature Stabiliz. : none Additional Information : Firmware upgrade only 3.7 Receiver Type : TRIMBLE NETR9 Satellite System : BDS+GAL+GLO+GPS+QZSS Serial Number : 5038K70470 Firmware Version : 5.44 Elevation Cutoff Setting : 0 deg Date Installed : 2020-03-16T02:04Z Date Removed : 2020-11-11T00:00Z Temperature Stabiliz. : none Additional Information : Firmware upgrade only 3.8 Receiver Type : SEPT POLARX5TR Satellite System : GPS+QZSS+GLO+GAL+BDS Serial Number : 3055081 Firmware Version : 5.3.2 Elevation Cutoff Setting : 0 deg Date Installed : 2020-11-11T00:00Z Date Removed : 2021-08-11T03:36Z Temperature Stabiliz. : 0.0 Additional Information : 3.9 Receiver Type : SEPT POLARX5TR Satellite System : GPS+QZSS+GLO+GAL+BDS Serial Number : 3055081 Firmware Version : 5.4.0 Elevation Cutoff Setting : 0 deg Date Installed : 2021-08-11T03:36Z Date Removed : 2022-10-31T23:56Z Temperature Stabiliz. : 0.0 Additional Information : 3.10 Receiver Type : SEPT POLARX5TR Satellite System : GPS+QZSS+GLO+GAL+BDS Serial Number : 3055081 Firmware Version : 5.5.0 Elevation Cutoff Setting : 0 deg Date Installed : 2022-10-31T23:56Z Date Removed : CCYY-MM-DDThh:mmZ Temperature Stabiliz. : 0.0 Additional Information : Firmware update only 3.x Receiver Type : (A20, from rcvr_ant.tab; see instructions) Satellite System : (GPS+GLO+GAL+BDS+QZSS+SBAS) Serial Number : (A20, but note the first A5 is used in SINEX) Firmware Version : (A11) Elevation Cutoff Setting : (deg) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : (multiple lines) 4. GNSS Antenna Information 4.1 Antenna Type : ASH701945C_M NONE Serial Number : CR620011902 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 000.0000 Marker->ARP North Ecc(m) : 000.0000 Marker->ARP East Ecc(m) : 000.0000 Alignment from True N : 0 deg Antenna Radome Type : NONE Radome Serial Number : Antenna Cable Type : Coaxial CNT400 Antenna Cable Length : 150.0 m Date Installed : 2005-07-18T00:00Z Date Removed : 2022-09-09T05:41Z Additional Information : change the installed date from 2006-07-18 to : 2005-07-18 because of type error, confirmed with : Bob Twilley 4.2 Antenna Type : LEIAR25 NONE Serial Number : 727345 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 000.0250 Marker->ARP North Ecc(m) : 000.0000 Marker->ARP East Ecc(m) : 000.0000 Alignment from True N : 0 deg Antenna Radome Type : NONE Radome Serial Number : Antenna Cable Type : Coaxial CNT400 Antenna Cable Length : 150.0 m Date Installed : 2022-09-09T05:42Z Date Removed : CCYY-MM-DDThh:mmZ Additional Information : Antenna replaced and rotatable mount used. 4.x Antenna Type : (A20, from rcvr_ant.tab; see instructions) Serial Number : (A*, but note the first A5 is used in SINEX) Antenna Reference Point : (BPA/BCR/XXX from "antenna.gra"; see instr.) Marker->ARP Up Ecc. (m) : (F8.4) Marker->ARP North Ecc(m) : (F8.4) Marker->ARP East Ecc(m) : (F8.4) Alignment from True N : (deg; + is clockwise/east) Antenna Radome Type : (A4 from rcvr_ant.tab; see instructions) Radome Serial Number : Antenna Cable Type : (vendor & type number) Antenna Cable Length : (m) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 5. Surveyed Local Ties 5.1 Tied Marker Name : Parkes VLBI Tied Marker Usage : VLBI Tied Marker CDP Number : 7202 Tied Marker DOMES Number : 50108S001 Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : dy (m) : dz (m) : Accuracy (mm) : Survey method : Date Measured : (CCYY-MM-DDThh:mmZ) Additional Information : 5.2 Tied Marker Name : RM1 Tied Marker Usage : LOCAL CONTROL Tied Marker CDP Number : Tied Marker DOMES Number : Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : -9.6595 dy (m) : -21.0299 dz (m) : 0.2593 Accuracy (mm) : 1.0 mm Survey method : Total Station TRILATERATION/TRIANGULATION Date Measured : 2005-09-01T00:00Z Additional Information : 5.3 Tied Marker Name : RM2 Tied Marker Usage : LOCAL CONTROL Tied Marker CDP Number : Tied Marker DOMES Number : Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : 15.2173 dy (m) : -1.582 dz (m) : -16.138 Accuracy (mm) : 1.0 mm Survey method : Total Station TRILATERATION/TRIANGULATION Date Measured : 2005-09-01T00:00Z Additional Information : 5.4 Tied Marker Name : RM3 Tied Marker Usage : LOCAL CONTROL Tied Marker CDP Number : Tied Marker DOMES Number : Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : 1.4781 dy (m) : 14.1906 dz (m) : 14.728 Accuracy (mm) : 1.0 mm Survey method : Total Station TRILATERATION/TRIANGULATION Date Measured : 2005-09-01T00:00Z Additional Information : 5.5 Tied Marker Name : PAR1 Tied Marker Usage : LOCAL CONTROL Tied Marker CDP Number : Tied Marker DOMES Number : Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : 115.9418 dy (m) : 93.8973 dz (m) : -72.5579 Accuracy (mm) : 1.0 mm Survey method : Total StationTRILATERATION/TRIANGULATION Date Measured : 2005-09-01T00:00Z Additional Information : 5.x Tied Marker Name : Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc) Tied Marker CDP Number : (A4) Tied Marker DOMES Number : (A9) Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : (m) dy (m) : (m) dz (m) : (m) Accuracy (mm) : (mm) Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc) Date Measured : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 6. Frequency Standard 6.1 Standard Type : EXTERNAL H-MASER Input Frequency : 10 MHz Effective Dates : 2006-07-18/2022-07-19 Notes : Make: SAO, Model: VLG-10, S/N: IP1 6.2 Standard Type : EXTERNAL H-MASER Input Frequency : 10 MHz Effective Dates : 2022-07-19/CCYY-MM-DD Notes : Make: VREMYA 6.x Standard Type : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc) Input Frequency : (if external) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 7. Collocation Information 7.x Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc) Status : (PERMANENT/MOBILE) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8. Meteorological Instrumentation 8.1.x Humidity Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy (% rel h) : (% rel h) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.2.x Pressure Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (hPa) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.3.x Temp. Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (deg C) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.4.x Water Vapor Radiometer : Manufacturer : Serial Number : Distance to Antenna : (m) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.5.x Other Instrumentation : (multiple lines) 9. Local Ongoing Conditions Possibly Affecting Computed Position 9.1.x Radio Interferences : (TV/CELL PHONE ANTENNA/RADAR/etc) Observed Degradations : (SN RATIO/DATA GAPS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.2.x Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.3.x Signal Obstructions : (TREES/BUILDINGS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 10. Local Episodic Effects Possibly Affecting Data Quality 10.x Date : (CCYY-MM-DD/CCYY-MM-DD) Event : (TREE CLEARING/CONSTRUCTION/etc) 11. On-Site, Point of Contact Agency Information Agency : Geoscience Australia Preferred Abbreviation : Mailing Address : GPO Box 378 : Canberra ACT 2601 : AUSTRALIA : Canberra : 2601 : Australia Primary Contact Contact Name : Geoscience Australia Telephone (primary) : +61 2 6249 9004 Telephone (secondary) : +61 2 6249 9111 Fax : E-mail : gnss@ga.gov.au Secondary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Additional Information : 12. Responsible Agency (if different from 11.) Agency : Geoscience Australia Preferred Abbreviation : Mailing Address : GPO Box 378 : Canberra ACT 2601 : AUSTRALIA : Canberra : 2601 : Australia Primary Contact Contact Name : Geoscience Australia Telephone (primary) : +61 2 6249 9004 Telephone (secondary) : +61 2 6249 9111 Fax : E-mail : gnss@ga.gov.au Secondary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Additional Information : 13. More Information Primary Data Center : GA Secondary Data Center : CDDIS URL for More Information : http://www.ga.gov.au Hardcopy on File Site Map : Y Site Diagram : Y Horizon Mask : Y Monument Description : Y Site Pictures : Y Additional Information : Antenna Graphics with Dimensions (insert text graphic from file antenna.gra)