MATG00ITA Site Information Form (site log)
     International GNSS Service
     See Instructions at:
       https://files.igs.org/pub/station/general/sitelog_instr_v2.0.txt

0.   Form

     Prepared by (full name)  : Matera GNSS Team (gnss_op@est.asi.it)
     Date Prepared            : 2024-07-18
     Report Type              : UPDATE
     If Update:
      Previous Site Log       : matg00ita_20240227.log
      Modified/Added Sections : 7.1, 7.2, 11


1.   Site Identification of the GNSS Monument

     Site Name                : MateraG
     Nine Character ID        : MATG00ITA
     Monument Inscription     : Stable pillar on the roof (Marker ex-prare)
     IERS DOMES Number        : 12734M010
     CDP Number               : 
     Monument Description     : PILLAR
       Height of the Monument : 1.58 m
       Monument Foundation    : CONCRETE BLOCK
       Foundation Depth       : 
     Marker Description       : BRASS NAIL
     Date Installed           : 2012-01-30T00:00Z
     Geologic Characteristic  : BEDROCK
       Bedrock Type           : SEDIMENTARY
       Bedrock Condition      : JOINTED
       Fracture Spacing       : 
       Fault zones nearby     : 
         Distance/activity    : 
     Additional Information   : 


2.   Site Location Information

     City or Town             : Matera
     State or Province        : BASILICATA
     Country or Region        : ITA
     Tectonic Plate           : EURASIAN
     Approximate Position (ITRF)
       X coordinate (m)       : 4641953.0350
       Y coordinate (m)       : 1393063.5470
       Z coordinate (m)       : 4133279.5890
       Latitude (N is +)      : +403856.50
       Longitude (E is +)     : +0164216.75
       Elevation (m,ellips.)  : 537.0
     Additional Information   : 


3.   GNSS Receiver Information

3.1  Receiver Type            : LEICA GRX1200+GNSS
     Satellite System         : GPS+GLO+GAL
     Serial Number            : 495169
     Firmware Version         : 8.50/6.110
     Elevation Cutoff Setting : 5 deg
     Date Installed           : 2012-01-30T14:00Z
     Date Removed             : 2012-02-16T16:00Z
     Temperature Stabiliz.    : 
     Additional Information   : Galileo logging instaleld and activated

3.2  Receiver Type            : LEICA GRX1200+GNSS
     Satellite System         : GPS+GLO+GAL
     Serial Number            : 495169
     Firmware Version         : 8.50/6.110
     Elevation Cutoff Setting : 5 deg
     Date Installed           : 2012-02-16T16:00Z
     Date Removed             : 2012-04-12T11:21Z
     Temperature Stabiliz.    : 
     Additional Information   : Set receiver to track 'L2C and L2P(Y)'
                              : instead of 'L2P(Y)' only
                              : 'L5' tracking was already set and remained
                              : unchanged

3.3  Receiver Type            : LEICA GRX1200+GNSS
     Satellite System         : GPS+GLO+GAL
     Serial Number            : 495169
     Firmware Version         : 8.51/6.110
     Elevation Cutoff Setting : 0 deg
     Date Installed           : 2012-04-12T11:21Z
     Date Removed             : 2012-12-14T11:15Z
     Temperature Stabiliz.    : 
     Additional Information   : Changed firmware

3.4  Receiver Type            : LEICA GRX1200+GNSS
     Satellite System         : GPS+GLO+GAL
     Serial Number            : 495169
     Firmware Version         : 8.51/6.111
     Elevation Cutoff Setting : 0 deg
     Date Installed           : 2012-12-14T11:15Z
     Date Removed             : 2014-05-16T00:00Z
     Temperature Stabiliz.    : 
     Additional Information   : Changed ME firmware

3.5  Receiver Type            : LEICA GRX1200+GNSS
     Satellite System         : GPS+GLO+GAL+SBAS
     Serial Number            : 495169
     Firmware Version         : 8.71/6.112
     Elevation Cutoff Setting : 0 deg
     Date Installed           : 2014-05-17T00:00Z
     Date Removed             : 2016-04-08T11:45Z
     Temperature Stabiliz.    : 
     Additional Information   : Changed firmware

3.6  Receiver Type            : LEICA GRX1200+GNSS
     Satellite System         : GPS+GLO
     Serial Number            : 495169
     Firmware Version         : 8.71/6.112
     Elevation Cutoff Setting : 0 deg
     Date Installed           : 2016-04-08T11:45Z
     Date Removed             : 2016-05-26T10:00Z
     Temperature Stabiliz.    : 
     Additional Information   : Disabled Galileo + SBAS tracking

3.7  Receiver Type            : LEICA GRX1200+GNSS
     Satellite System         : GPS+GLO+GAL+SBAS
     Serial Number            : 495169
     Firmware Version         : 8.71/6.405
     Elevation Cutoff Setting : 0 deg
     Date Installed           : 2016-05-26T10:00Z
     Date Removed             : 2017-03-30T09:00Z
     Temperature Stabiliz.    : 
     Additional Information   : 

3.8  Receiver Type            : LEICA GRX1200+GNSS
     Satellite System         : GPS+GLO+GAL+BDS+SBAS
     Serial Number            : 495169
     Firmware Version         : 9.20/6.405
     Elevation Cutoff Setting : 0 deg
     Date Installed           : 2017-03-30T09:00Z
     Date Removed             : 2017-10-03T13:00Z
     Temperature Stabiliz.    : 
     Additional Information   : 

3.9  Receiver Type            : LEICA GR10
     Satellite System         : GPS+GLO+GAL+BDS+SBAS
     Serial Number            : 1704171
     Firmware Version         : 4.11/6.523
     Elevation Cutoff Setting : 0 deg
     Date Installed           : 2017-10-03T13:00Z
     Date Removed             : 2018-07-25T12:00Z
     Temperature Stabiliz.    : 
     Additional Information   : 

3.10 Receiver Type            : LEICA GR10
     Satellite System         : GPS+GLO+GAL+BDS+SBAS
     Serial Number            : 1704171
     Firmware Version         : 4.20/6.524
     Elevation Cutoff Setting : 0 deg
     Date Installed           : 2018-07-25T12:00Z
     Date Removed             : 2019-05-27T14:00Z
     Temperature Stabiliz.    : 
     Additional Information   : 

3.11 Receiver Type            : LEICA GR10
     Satellite System         : GPS+GLO+GAL+BDS+SBAS
     Serial Number            : 1704171
     Firmware Version         : 4.20/6.712
     Elevation Cutoff Setting : 0 deg
     Date Installed           : 2019-05-27T14:15Z
     Date Removed             : 2019-07-11T09:30Z
     Temperature Stabiliz.    : 
     Additional Information   : Updated ME only firmware from 6.524 to 6.712

3.12 Receiver Type            : LEICA GR10
     Satellite System         : GPS+GLO+GAL+BDS+SBAS
     Serial Number            : 1704171
     Firmware Version         : 4.31/6.712
     Elevation Cutoff Setting : 0 deg
     Date Installed           : 2019-07-11T09:45Z
     Date Removed             : 2020-03-26T09:45Z
     Temperature Stabiliz.    : 
     Additional Information   : Updated firmware from 4.20/6.712 to 4.31/6.712

3.13 Receiver Type            : LEICA GR10
     Satellite System         : GPS+GLO+GAL+BDS+SBAS
     Serial Number            : 1704171
     Firmware Version         : 4.31/6.713
     Elevation Cutoff Setting : 0 deg
     Date Installed           : 2020-03-26T09:45Z
     Date Removed             : 2023-11-16T00:00Z
     Temperature Stabiliz.    : 
     Additional Information   : Updated firmware from 4.31/6.712 to 4.31/6.713

3.14 Receiver Type            : LEICA GR10
     Satellite System         : GPS+GLO+GAL+BDS+SBAS
     Serial Number            : 1704171
     Firmware Version         : 4.70/6.525
     Elevation Cutoff Setting : 0 deg
     Date Installed           : 2023-11-16T00:00Z
     Date Removed             : 2024-01-11T00:00Z
     Temperature Stabiliz.    : 
     Additional Information   : 

3.15 Receiver Type            : LEICA GR10
     Satellite System         : GPS+GLO+GAL
     Serial Number            : 1704171
     Firmware Version         : 4.70/6.525
     Elevation Cutoff Setting : 0 deg
     Date Installed           : 2024-01-11T00:00Z
     Date Removed             : 2024-02-27T00:00Z
     Temperature Stabiliz.    : 
     Additional Information   : 

3.16 Receiver Type            : LEICA GR10
     Satellite System         : GPS+GLO+GAL
     Serial Number            : 1704171
     Firmware Version         : 4.80/6.525
     Elevation Cutoff Setting : 0 deg
     Date Installed           : 2024-02-27T00:00Z
     Date Removed             : (CCYY-MM-DDThh:mmZ)
     Temperature Stabiliz.    : 
     Additional Information   : 

3.x  Receiver Type            : (A20, from rcvr_ant.tab; see instructions)
     Satellite System         : (GPS+GLO+GAL+BDS+QZSS+SBAS)
     Serial Number            : (A20, but note the first A5 is used in SINEX)
     Firmware Version         : (A11)
     Elevation Cutoff Setting : (deg)
     Date Installed           : (CCYY-MM-DDThh:mmZ)
     Date Removed             : (CCYY-MM-DDThh:mmZ)
     Temperature Stabiliz.    : (none or tolerance in degrees C)
     Additional Information   : (multiple lines)


4.   GNSS Antenna Information

4.1  Antenna Type             : LEIAR25         NONE
     Serial Number            : 9300006
     Antenna Reference Point  : BPA
     Marker->ARP Up Ecc. (m)  : 0.0000
     Marker->ARP North Ecc(m) : 0.0000
     Marker->ARP East Ecc(m)  : 0.0000
     Alignment from True N    : 0 deg
     Antenna Radome Type      : NONE
     Radome Serial Number     : 
     Antenna Cable Type       : H1000
     Antenna Cable Length     : 40 m
     Date Installed           : 2012-01-30T14:00Z
     Date Removed             : (CCYY-MM-DDThh:mmZ)
     Additional Information   : Antenna on former prare pillar.
                              : On DOY 2019/008 at approx 10:50 UTC the antenna
                              : cable connector was replaced by a new one. The
                              : relacement was necessary due to a bad copper
                              : shield connection.

4.x  Antenna Type             : (A20, from rcvr_ant.tab; see instructions)
     Serial Number            : (A*, but note the first A5 is used in SINEX)
     Antenna Reference Point  : (BPA/BCR/XXX from "antenna.gra"; see instr.)
     Marker->ARP Up Ecc. (m)  : (F8.4)
     Marker->ARP North Ecc(m) : (F8.4)
     Marker->ARP East Ecc(m)  : (F8.4)
     Alignment from True N    : (deg; + is clockwise/east)
     Antenna Radome Type      : (A4 from rcvr_ant.tab; see instructions)
     Radome Serial Number     :
     Antenna Cable Type       : (vendor & type number)
     Antenna Cable Length     : (m)
     Date Installed           : (CCYY-MM-DDThh:mmZ)
     Date Removed             : (CCYY-MM-DDThh:mmZ)
     Additional Information   : (multiple lines)


5.   Surveyed Local Ties

5.x  Tied Marker Name         :
     Tied Marker Usage        : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc)
     Tied Marker CDP Number   : (A4)
     Tied Marker DOMES Number : (A9)
     Differential Components from GNSS Marker to the tied monument (ITRS)
       dx (m)                 : (m)
       dy (m)                 : (m)
       dz (m)                 : (m)
     Accuracy (mm)            : (mm)
     Survey method            : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc)
     Date Measured            : (CCYY-MM-DDThh:mmZ)
     Additional Information   : (multiple lines)


6.   Frequency Standard

6.1  Standard Type            : INTERNAL
       Input Frequency        : 
       Effective Dates        : 2012-01-30/CCYY-MM-DD
       Notes                  : 

6.x  Standard Type            : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc)
       Input Frequency        : (if external)
       Effective Dates        : (CCYY-MM-DD/CCYY-MM-DD)
       Notes                  : (multiple lines)


7.   Collocation Information

7.1  Instrumentation Type     : VLBI
       Status                 : PERMANENT
       Effective Dates        : 1990-05-01/2000-12-10
       Notes                  : 

7.2  Instrumentation Type     : SLR-SAO
       Status                 : PERMANENT
       Effective Dates        : 1993-09-01/2000-12-10
       Notes                  : 

7.x  Instrumentation Type     : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc)
       Status                 : (PERMANENT/MOBILE)
       Effective Dates        : (CCYY-MM-DD/CCYY-MM-DD)
       Notes                  : (multiple lines)


8.   Meteorological Instrumentation

8.1.1 Humidity Sensor Model   : HMD70Y
       Manufacturer           : VAISALA
       Serial Number          : 
       Data Sampling Interval : 60 sec
       Accuracy (% rel h)     : 2
       Aspiration             : 
       Height Diff to Ant     : 0.0 m
       Calibration date       : 
       Effective Dates        : 2002-07-18/CCYY-MM-DD
       Notes                  : 

8.1.x Humidity Sensor Model   :
       Manufacturer           :
       Serial Number          :
       Data Sampling Interval : (sec)
       Accuracy (% rel h)     : (% rel h)
       Aspiration             : (UNASPIRATED/NATURAL/FAN/etc)
       Height Diff to Ant     : (m)
       Calibration date       : (CCYY-MM-DD)
       Effective Dates        : (CCYY-MM-DD/CCYY-MM-DD)
       Notes                  : (multiple lines)

8.2.1 Pressure Sensor Model   : DPI 141
       Manufacturer           : DRUCK
       Serial Number          : 
       Data Sampling Interval : 60 sec
       Accuracy               : 0.25 hPa
       Height Diff to Ant     : -0.5 m
       Calibration date       : 2002-07-18
       Effective Dates        : 2002-07-18/CCYY-MM-DD
       Notes                  : 

8.2.x Pressure Sensor Model   :
       Manufacturer           :
       Serial Number          :
       Data Sampling Interval : (sec)
       Accuracy               : (hPa)
       Height Diff to Ant     : (m)
       Calibration date       : (CCYY-MM-DD)
       Effective Dates        : (CCYY-MM-DD/CCYY-MM-DD)
       Notes                  : (multiple lines)

8.3.1 Temp. Sensor Model      : HMD70Y - PT 1000 IEC 751 class B
       Manufacturer           : VAISALA
       Serial Number          : 
       Data Sampling Interval : 60 sec
       Accuracy               : 0.2 deg C
       Aspiration             : 
       Height Diff to Ant     : 0.0 m
       Calibration date       : 
       Effective Dates        : 2002-07-18/CCYY-MM-DD
       Notes                  : 

8.3.x Temp. Sensor Model      :
       Manufacturer           :
       Serial Number          :
       Data Sampling Interval : (sec)
       Accuracy               : (deg C)
       Aspiration             : (UNASPIRATED/NATURAL/FAN/etc)
       Height Diff to Ant     : (m)
       Calibration date       : (CCYY-MM-DD)
       Effective Dates        : (CCYY-MM-DD/CCYY-MM-DD)
       Notes                  : (multiple lines)

8.4.x Water Vapor Radiometer  :
       Manufacturer           :
       Serial Number          :
       Distance to Antenna    : (m)
       Height Diff to Ant     : (m)
       Calibration date       : (CCYY-MM-DD)
       Effective Dates        : (CCYY-MM-DD/CCYY-MM-DD)
       Notes                  : (multiple lines)

8.5.x Other Instrumentation   : (multiple lines)


9.  Local Ongoing Conditions Possibly Affecting Computed Position

9.1.x Radio Interferences     : (TV/CELL PHONE ANTENNA/RADAR/etc)
       Observed Degradations  : (SN RATIO/DATA GAPS/etc)
       Effective Dates        : (CCYY-MM-DD/CCYY-MM-DD)
       Additional Information : (multiple lines)

9.2.x Multipath Sources       : (METAL ROOF/DOME/VLBI ANTENNA/etc)
       Effective Dates        : (CCYY-MM-DD/CCYY-MM-DD)
       Additional Information : (multiple lines)

9.3.x Signal Obstructions     : (TREES/BUILDINGS/etc)
       Effective Dates        : (CCYY-MM-DD/CCYY-MM-DD)
       Additional Information : (multiple lines)


10.  Local Episodic Effects Possibly Affecting Data Quality

10.x Date                     : (CCYY-MM-DD/CCYY-MM-DD)
     Event                    : (TREE CLEARING/CONSTRUCTION/etc)


11.   On-Site, Point of Contact Agency Information

     Agency                   : Agenzia Spaziale Italiana
                              : Centro di Geodesia Spaziale
     Preferred Abbreviation   : ASI
     Mailing Address          : Contrada Terlecchia
                              : 75100 Matera
                              : Italy
     Primary Contact
       Contact Name           : Matera GNSS Team
       Telephone (primary)    : 
       Telephone (secondary)  : 
       Fax                    : 
       E-mail                 : gnss_op@est.asi.it
     Secondary Contact
       Contact Name           : Giuseppe Colucci
       Telephone (primary)    : +39 0835 377574
       Telephone (secondary)  : 
       Fax                    : +39 06 4099 9941
       E-mail                 : giuseppe.colucci@e-geos.it
     Additional Information   : 


12.  Responsible Agency (if different from 11.)

     Agency                   : Agenzia Spaziale Italiana
                              : Centro di Geodesia Spaziale
     Preferred Abbreviation   : ASI
     Mailing Address          : Contrada Terlecchia
                              : 75100 Matera
                              : Italy
     Primary Contact
       Contact Name           : Matera GNSS team
       Telephone (primary)    : 
       Telephone (secondary)  : 
       Fax                    : 
       E-mail                 : gnss_op@hp835.mt.asi.it
     Secondary Contact
       Contact Name           : 
       Telephone (primary)    : 
       Telephone (secondary)  : 
       Fax                    : 
       E-mail                 : 
     Additional Information   : 


13.  More Information

     Primary Data Center      : ASI
     Secondary Data Center    : BKG
     URL for More Information : 
     Hardcopy on File
       Site Map               : 
       Site Diagram           : 
       Horizon Mask           : 
       Monument Description   : 
       Site Pictures          : 
     Additional Information   : 
     Antenna Graphics with Dimensions


LEIAR25

                       +-------+                          <--  0.1995
                      /         \
                    +-           -+
                |---+-------------+---|                   <--  0.1456  TCR
             |---------------------------|
          |---------------------------------|
       |---------------------------------------|
    +---------------------------------------------+
    |                                             |
    |                                             |
  +-+---------------------------------------------+-+
  +-----------------+-------------+-----------------+     <--  0.0320  BCR
                    |             |
                    |             |
                    +------x------+                       <--  0.0000  BPA=ARP

  <--                    0.3802                   -->

ARP: Antenna Reference Point
L1 : L1 Phase Center                   L2 : L2 Phase Center
BPA: Bottom of Preamplifier            BCR: Bottom of Chokering